SOLD
I have a used distributor. The version with the 13 in built advance profiles covering all T/E/S models. This is the 27mm shaft diameter for 2.0-2.2l engines. This is a simple drop-in upgrade which works with or without CDI. Only selling as I have gone to a twin plug set up.
Comes with rotor arm but no cap - it takes standard caps so you can use your existing cap.
£200 delivered in UK
https://www.123ignitionshop.com/gb/pors ... e911S.html
123 distributor
Moderator: Bootsy
123 distributor
Last edited by knapmann on Tue Jun 20, 2023 8:33 am, edited 3 times in total.
Re: 123 distributor
Do you have a suitable dizzy for your new twin plug engine yet or are you going coil pads?
-
- I need to get out more!
- Posts: 3423
- Joined: Mon Apr 16, 2007 9:06 pm
- Location: Portland, Oregon, USA
Re: 123 distributor
knapmann wrote: ↑Mon Jun 12, 2023 3:04 pm I have a used distributor. The version with the 13 in built advance profiles covering all T/E/S models. This is the 27mm shaft diameter for 2.0-2.2l engines. This is a simple drop-in upgrade which works with or without CDI. Only selling as I have gone to a twin plug set up.
Comes with rotor arm but no cap - it takes standard caps so you can use your existing cap.
£200 delivered in UK
Picture to follow
https://www.123ignitionshop.com/gb/pors ... e911S.html
I'll take it please if still available....Will send you a PM
Thanks
Chris
# 465
1967 912 Polo Red
1968 912/11 RAL 7001 ' MOD ROD '
1990 964 C2 Velvet Red
1991 VW Vanagon GL (SOLD - Vanagone)
2017 Coleman CT200U
“It’s not where you’re from, it's where you’re at”
1967 912 Polo Red
1968 912/11 RAL 7001 ' MOD ROD '
1990 964 C2 Velvet Red
1991 VW Vanagon GL (SOLD - Vanagone)
2017 Coleman CT200U
“It’s not where you’re from, it's where you’re at”
Re: 123 distributor
yes its still available, I havent received a PM though?jury wrote: ↑Mon Jun 12, 2023 9:30 pmknapmann wrote: ↑Mon Jun 12, 2023 3:04 pm I have a used distributor. The version with the 13 in built advance profiles covering all T/E/S models. This is the 27mm shaft diameter for 2.0-2.2l engines. This is a simple drop-in upgrade which works with or without CDI. Only selling as I have gone to a twin plug set up.
Comes with rotor arm but no cap - it takes standard caps so you can use your existing cap.
£200 delivered in UK
Picture to follow
https://www.123ignitionshop.com/gb/pors ... e911S.html
I'll take it please if still available....Will send you a PM
Thanks
Chris