Longer wheel studs question

For classic Porsche 911 content

Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin

Post Reply
samcro
DDK addict
Posts: 105
Joined: Wed Jan 16, 2013 5:43 pm

Longer wheel studs question

Post by samcro »

I fancy longer wheel studs than the stock ones and not being in the budget for the titanium ones I thought I would buy 60mm long ones from design911,steel version,I’ve now noticed the splines on the original ones are finer than the longer ones I e purchased and I really don’t want to damage my hubs,I’m not going to run any spacers and really don’t want to call design911 again and try to explain my issues,does say there for 911 but you can clearly see the differences,anyone buy from another source as I can’t seem to find anywhere in the UK?
911hillclimber
Nurse, I think I need some assistance
Posts: 18858
Joined: Mon Mar 10, 2008 6:26 pm
Location: West Midlands

Re: Longer wheel studs question

Post by 911hillclimber »

Not sure if this helps...
Type911 show 4 stud types for sale, the difference being length, standard to 75mm long.
It might help to call them and discuss theirs v Design911?
73T 911 Coupe, road/hillclimber 3.2L
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
Post Reply