Hi looking for off cut of mounting flanges to back box of 914 exhaust?
If anyone has a set of damaged/broken heat exchangers would be interested in the rear flanges and pipe work, say a foot from flange to be cut off and posted? Looking at making a custom rear box for my 914 and tress ends could assist? WHY?
Wtd Damaged 914 heat exchanger ends
Moderator: Miggs
Re: Wtd Damaged 914 heat exchanger ends
Hi Raymond, are you still working in sunny Newbury, or have you gone back to Snowy Stirling ?
If you're still local to me , a meet up could be advantageous as I have loads of expensive shite here.
Cheers
Ian
If you're still local to me , a meet up could be advantageous as I have loads of expensive shite here.
Cheers
Ian
formula vee-
'60 356b rhd CONVERTED TO "A"
'67 912 rhd SOLD
'69 914 Crayford RHD
'71 914 Crayford RHD
'69 911s lhd
'71 914/6 race car
Marcos SOLD
66 CHEVY pick-up
57 CHEVY Pickup
Porsche Tractor
2 X PORSCHE PINBALL M/C
'60 356b rhd CONVERTED TO "A"
'67 912 rhd SOLD
'69 914 Crayford RHD
'71 914 Crayford RHD
'69 911s lhd
'71 914/6 race car
Marcos SOLD
66 CHEVY pick-up
57 CHEVY Pickup
Porsche Tractor
2 X PORSCHE PINBALL M/C
Re: Wtd Damaged 914 heat exchanger ends
I have an old exhaust for a 356 and some J tubes for a 356
Not too sure if they are the same as a 914?
Not too sure if they are the same as a 914?
-Macs speed shop-
V dubs and Porsche tubs
87 924S (Now dead or is it?)
62 356 (Working on it!)
66 912 (Sadly gone - but have you seen the price of it!!)
Apal speedster (Sadly gone)
BSA Bantam in bits
A35 Race car in the making (peanutracing)
V dubs and Porsche tubs
87 924S (Now dead or is it?)
62 356 (Working on it!)
66 912 (Sadly gone - but have you seen the price of it!!)
Apal speedster (Sadly gone)
BSA Bantam in bits
A35 Race car in the making (peanutracing)
-
- Nurse, I think I need some assistance
- Posts: 7812
- Joined: Mon Apr 16, 2012 4:31 pm
Re: Wtd Damaged 914 heat exchanger ends
Very different
Sent from my M2004J19C using Tapatalk
Sent from my M2004J19C using Tapatalk
“A REMINDER. I would be grateful if those members who have borrowed bits from me in emergencies (e.g starter motor, oil cooler, etc) would return them and/or contact me”. – Chris Turner RIP