911T crankshaft wanted
Moderator: Miggs
911T crankshaft wanted
Has anyone got a really nice 911T crankshaft for my 1971 2.2 engine as looking at my one it seems to be worn out according to my measurements,I’m thinking maybe a replacement is needed,please let me know if you a good useable one for sale thanks
Cheers
Andy
Cheers
Andy
-
- Nurse, I think I need some assistance
- Posts: 7726
- Joined: Mon Apr 16, 2012 4:31 pm
Re: 911T crankshaft wanted
Hopefully someone will have one for you.
However, I think in 616 land the bearing are toughest to find? Have you measured the case before you look for a crank? Apologies if you have considered this already
Sent from my M2004J19C using Tapatalk
However, I think in 616 land the bearing are toughest to find? Have you measured the case before you look for a crank? Apologies if you have considered this already
Sent from my M2004J19C using Tapatalk
“A REMINDER. I would be grateful if those members who have borrowed bits from me in emergencies (e.g starter motor, oil cooler, etc) would return them and/or contact me”. – Chris Turner RIP
Re: 911T crankshaft wanted
The case was just measured and machined and all is good but I’ve just measured my crankshaft journals and they’re below the limit,I’m guessing I need another crankshaft
-
- DDK addict
- Posts: 131
- Joined: Wed Jun 11, 2014 6:02 pm
Re: 911T crankshaft wanted
I have one, std/std. Pm me your email and I'll send photos.
Re: 911T crankshaft wanted
PM sent
Re: 911T crankshaft wanted
I also have one if you need it
-
- DDK slapper chatter
- Posts: 396
- Joined: Sun Feb 08, 2015 9:17 am
Re: 911T crankshaft wanted
i may be interested can you pm me some pics sizes and price please
thanks
thanks
-
- DDK slapper chatter
- Posts: 404
- Joined: Sat May 23, 2009 7:30 pm
Re: 911T crankshaft wanted
If you need a replacement crankshaft for your T, you might want to consider upgrading to a 2.0, 2.2,2.4 Counterbalanced crankshaft. Now that you have completely torn down your engine, spend a little extra and add some HP. A counterbalanced crank will allow your engine to spin at much higher rpm's, which is where the power is on the early smaller displacement engines...