USA 1970 911T - the Tangerine Dream
Moderator: Bootsy
-
- Nurse, I think I need some assistance
- Posts: 18932
- Joined: Mon Mar 10, 2008 6:26 pm
- Location: West Midlands
Re: USA 1970 911T - the Tangerine Dream
Des911:
I had my bearings and chains arrive last week exactly as their 3rd estimate (not a promise) date.
Had to keep asking them in 2 week periods, but got them.
They were simply not available to them, but everyone else had them!
Not sure how they would react to a demand to cancel, but after such a long time in your case, they should re-emburse 100%
I had my bearings and chains arrive last week exactly as their 3rd estimate (not a promise) date.
Had to keep asking them in 2 week periods, but got them.
They were simply not available to them, but everyone else had them!
Not sure how they would react to a demand to cancel, but after such a long time in your case, they should re-emburse 100%
73T 911 Coupe, road/hillclimber 3.2L
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
-
- Nurse, I think I need some assistance
- Posts: 7760
- Joined: Mon Apr 16, 2012 4:31 pm
Re: USA 1970 911T - the Tangerine Dream
So I lost a clip on the ball joints on the carburettor rods on 914. I tried to find a clip but didn't know the size. I asked a local place, that develops vee cars, if they had a spare one and they never use them. If the ball joint is loose you need to replace that?wadsworthi wrote:Yes you can fit a clip which I think is 8mm ball. Here is a link, but not in stock at present. https://www.ebay.co.uk/itm/Ball-Socket- ... 3b5433bc94
Ian
Sent from my M2004J19C using Tapatalk
“A REMINDER. I would be grateful if those members who have borrowed bits from me in emergencies (e.g starter motor, oil cooler, etc) would return them and/or contact me”. – Chris Turner RIP
-
- DDK 1st, 2nd and 3rd for me!
- Posts: 2041
- Joined: Thu Jul 08, 2021 8:18 am
- Location: Lichfield
Re: USA 1970 911T - the Tangerine Dream
I learnt that you can pull the ball joints apart with a little force, and it takes a great deal more force to do so if you put the tiny clip on. I recommend adding the clip as it's inexpensive and easy to fit. My 3.2 Carrera has the tiny clip, and even though the balljoint under the car near the transmission crank is very badly worn, it has somehow stayed together. I have a new ball socket on order but I'm certain it would have come open and let me down by now, without the clip on.neilbardsley wrote:So I lost a clip on the ball joints on the carburettor rods on 914. I tried to find a clip but didn't know the size. I asked a local place, that develops vee cars, if they had a spare one and they never use them. If the ball joint is loose you need to replace that?wadsworthi wrote:Yes you can fit a clip which I think is 8mm ball. Here is a link, but not in stock at present. https://www.ebay.co.uk/itm/Ball-Socket- ... 3b5433bc94
Ian
Sent from my M2004J19C using Tapatalk
I'm pretty sure the M5 guess was right (now in stock) but I got an M6 for my 911T and was able to tighten it slightly with pliers and it fitted perfectly.
Depending where it's for, this is the socket: https://www.design911.co.uk/fu/prod1320 ... 142314700/
1970 911T, Signal orange (Restoration thread)
1988 3.2 Carrera backdate, Black
2001 996 Turbo, Lapis blue (am I allowed to put that here?)
I'm looking for a pre-impact bumper 911S or other high-revving 911 to restore - please let me know if you see one.
1988 3.2 Carrera backdate, Black
2001 996 Turbo, Lapis blue (am I allowed to put that here?)
I'm looking for a pre-impact bumper 911S or other high-revving 911 to restore - please let me know if you see one.
-
- DDK 1st, 2nd and 3rd for me!
- Posts: 2041
- Joined: Thu Jul 08, 2021 8:18 am
- Location: Lichfield
Re: USA 1970 911T - the Tangerine Dream
Ordered an ebony knob off http://builtbybasil.com
Paid extra $$ for the proper Porsche shape, no metal collar and a crush sleeve fitment.
He's putting in a signal orange layer for me and signal orange 5 speed 901 pattern on the top. Happy Christmas to me.
Sent from my SM-G988B using Tapatalk
Paid extra $$ for the proper Porsche shape, no metal collar and a crush sleeve fitment.
He's putting in a signal orange layer for me and signal orange 5 speed 901 pattern on the top. Happy Christmas to me.
Sent from my SM-G988B using Tapatalk
1970 911T, Signal orange (Restoration thread)
1988 3.2 Carrera backdate, Black
2001 996 Turbo, Lapis blue (am I allowed to put that here?)
I'm looking for a pre-impact bumper 911S or other high-revving 911 to restore - please let me know if you see one.
1988 3.2 Carrera backdate, Black
2001 996 Turbo, Lapis blue (am I allowed to put that here?)
I'm looking for a pre-impact bumper 911S or other high-revving 911 to restore - please let me know if you see one.
-
- DDK 1st, 2nd and 3rd for me!
- Posts: 2041
- Joined: Thu Jul 08, 2021 8:18 am
- Location: Lichfield
Re: USA 1970 911T - the Tangerine Dream
A sad day for the 911T as this is going to render it undriveable for the foreseeable future But water's coming in and I need to determine the health of the windscreen surround and to stem any deterioration which may be occurring.
Knowing how one thing can lead to another, she could have had her last drive before a full respray.
Sent from my SM-G988B using Tapatalk
Knowing how one thing can lead to another, she could have had her last drive before a full respray.
Sent from my SM-G988B using Tapatalk
1970 911T, Signal orange (Restoration thread)
1988 3.2 Carrera backdate, Black
2001 996 Turbo, Lapis blue (am I allowed to put that here?)
I'm looking for a pre-impact bumper 911S or other high-revving 911 to restore - please let me know if you see one.
1988 3.2 Carrera backdate, Black
2001 996 Turbo, Lapis blue (am I allowed to put that here?)
I'm looking for a pre-impact bumper 911S or other high-revving 911 to restore - please let me know if you see one.
-
- DDK 1st, 2nd and 3rd for me!
- Posts: 2041
- Joined: Thu Jul 08, 2021 8:18 am
- Location: Lichfield
Re: USA 1970 911T - the Tangerine Dream
A bit of scraping reveals more original paint.
And miraculously those little bowls in the bottom corners are free of any significant rust.
It continues to be a car of happy surprises, although this is a bitter-sweet one having removed the windscreen and put the car out of action unnecessarily in order to find out.
Sent from my SM-G988B using Tapatalk
And miraculously those little bowls in the bottom corners are free of any significant rust.
It continues to be a car of happy surprises, although this is a bitter-sweet one having removed the windscreen and put the car out of action unnecessarily in order to find out.
Sent from my SM-G988B using Tapatalk
1970 911T, Signal orange (Restoration thread)
1988 3.2 Carrera backdate, Black
2001 996 Turbo, Lapis blue (am I allowed to put that here?)
I'm looking for a pre-impact bumper 911S or other high-revving 911 to restore - please let me know if you see one.
1988 3.2 Carrera backdate, Black
2001 996 Turbo, Lapis blue (am I allowed to put that here?)
I'm looking for a pre-impact bumper 911S or other high-revving 911 to restore - please let me know if you see one.
-
- DDK 1st, 2nd and 3rd for me!
- Posts: 2041
- Joined: Thu Jul 08, 2021 8:18 am
- Location: Lichfield
Re: USA 1970 911T - the Tangerine Dream
Starting to think about repairing the edge of the offside centre tunnel at the very base where it meets the floor, near the back of the offside front seat bracket. I assume there is stuff nearby that needs stripping out? E.g. starter cable, fuel line?
It looks like I'm lucky in needing to repair the offside rather than the near.
Sent from my SM-G988B using Tapatalk
It looks like I'm lucky in needing to repair the offside rather than the near.
Sent from my SM-G988B using Tapatalk
1970 911T, Signal orange (Restoration thread)
1988 3.2 Carrera backdate, Black
2001 996 Turbo, Lapis blue (am I allowed to put that here?)
I'm looking for a pre-impact bumper 911S or other high-revving 911 to restore - please let me know if you see one.
1988 3.2 Carrera backdate, Black
2001 996 Turbo, Lapis blue (am I allowed to put that here?)
I'm looking for a pre-impact bumper 911S or other high-revving 911 to restore - please let me know if you see one.
-
- Nurse, I think I need some assistance
- Posts: 18932
- Joined: Mon Mar 10, 2008 6:26 pm
- Location: West Midlands
Re: USA 1970 911T - the Tangerine Dream
I think I would cut out the rust and see what is adjacent to the hole.
The fuel line is steel, so as long as it is empty all is good.
You are lucky with those windscreen lower corners rob, I hope the rears are as good!
The fuel line is steel, so as long as it is empty all is good.
You are lucky with those windscreen lower corners rob, I hope the rears are as good!
73T 911 Coupe, road/hillclimber 3.2L
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
-
- Nurse, I think I need some assistance
- Posts: 10289
- Joined: Wed Mar 31, 2004 1:27 pm
- Location: Cheshire
- Contact:
Re: USA 1970 911T - the Tangerine Dream
The harness and starter cable should be in a separate duct at the top of the tunnel. The fuel lines should be in a similar duct on the left.
Attached is a very special drawing for you showing what I mean. Viewed from rear looking forward
I wouldn’t want to weld down there anyway as you’ve also got the front rear brake pipe and gearshift gaiters in that area.
If you have a little fire inside (as you will) it might toast the loom where it comes out of it’s little tunnel and goes through the rear bulkhead.
Attached is a very special drawing for you showing what I mean. Viewed from rear looking forward
I wouldn’t want to weld down there anyway as you’ve also got the front rear brake pipe and gearshift gaiters in that area.
If you have a little fire inside (as you will) it might toast the loom where it comes out of it’s little tunnel and goes through the rear bulkhead.
-
- Nurse, I think I need some assistance
- Posts: 10289
- Joined: Wed Mar 31, 2004 1:27 pm
- Location: Cheshire
- Contact:
Re: USA 1970 911T - the Tangerine Dream
The fuel pipes are also in free space between the bulkhead and the duct.
-
- Nurse, I think I need some assistance
- Posts: 10289
- Joined: Wed Mar 31, 2004 1:27 pm
- Location: Cheshire
- Contact:
Re: USA 1970 911T - the Tangerine Dream
Front showing two fuel pipes and the brake pipe. Loom etc is already out.
Looking down the tunnel to the back you can see in the distance when the pipes emerge
The little duct
Again you can see things in the tunnel here: thin tube at the bottom of the picture is for the heater valve cable.
Sent from my iPhone using Tapatalk
Looking down the tunnel to the back you can see in the distance when the pipes emerge
The little duct
Again you can see things in the tunnel here: thin tube at the bottom of the picture is for the heater valve cable.
Sent from my iPhone using Tapatalk
-
- DDK 1st, 2nd and 3rd for me!
- Posts: 2041
- Joined: Thu Jul 08, 2021 8:18 am
- Location: Lichfield
Re: USA 1970 911T - the Tangerine Dream
Cracked open a lovely pair of period correct(ish) seats today. They're almost too good to reupholster.
Plus a couple of nice bonuses on top...
A Recaro knob in place intact:
...and even better all four top and bottom runners present. Huge thanks to the ddk-er who came forward with them.
Sent from my SM-G988B using Tapatalk
Plus a couple of nice bonuses on top...
A Recaro knob in place intact:
...and even better all four top and bottom runners present. Huge thanks to the ddk-er who came forward with them.
Sent from my SM-G988B using Tapatalk
1970 911T, Signal orange (Restoration thread)
1988 3.2 Carrera backdate, Black
2001 996 Turbo, Lapis blue (am I allowed to put that here?)
I'm looking for a pre-impact bumper 911S or other high-revving 911 to restore - please let me know if you see one.
1988 3.2 Carrera backdate, Black
2001 996 Turbo, Lapis blue (am I allowed to put that here?)
I'm looking for a pre-impact bumper 911S or other high-revving 911 to restore - please let me know if you see one.
Re: USA 1970 911T - the Tangerine Dream
Whats the overall plan then for those seats?RobFrost wrote:Cracked open a lovely pair of period correct(ish) seats today. They're almost too good to reupholster.
Dean
1973T Targa MFI 334 met blu- under restoration https://www.ddk-online.com/phpBB2/viewt ... 28&t=67060
1980 924 Turbo, blu/grn tartan - restored
1973T Targa MFI 334 met blu- under restoration https://www.ddk-online.com/phpBB2/viewt ... 28&t=67060
1980 924 Turbo, blu/grn tartan - restored
-
- DDK 1st, 2nd and 3rd for me!
- Posts: 2041
- Joined: Thu Jul 08, 2021 8:18 am
- Location: Lichfield
Re: USA 1970 911T - the Tangerine Dream
I'm still mulling it over. Also, I may be no good at upholstery, in which case plans may change. But I have a couple of cows, some basketweave vinyl and a sewing machine. I'm torn between keeping it original on one hand and adding some personal touches on the other. Maybe the answer is to keep it very close to original, with very subtle unique touches. I also like the look of the gulf orange houndstooth fabric Garry has. Another factor is that I still have the 1980s aftermarket Recaros which are half the weight and twice as comfortable. They could also be covered and I could run it with two seat options.
1970 911T, Signal orange (Restoration thread)
1988 3.2 Carrera backdate, Black
2001 996 Turbo, Lapis blue (am I allowed to put that here?)
I'm looking for a pre-impact bumper 911S or other high-revving 911 to restore - please let me know if you see one.
1988 3.2 Carrera backdate, Black
2001 996 Turbo, Lapis blue (am I allowed to put that here?)
I'm looking for a pre-impact bumper 911S or other high-revving 911 to restore - please let me know if you see one.
-
- DDK 1st, 2nd and 3rd for me!
- Posts: 2041
- Joined: Thu Jul 08, 2021 8:18 am
- Location: Lichfield
Re: USA 1970 911T - the Tangerine Dream
Started tidying up this old vw jack. Early911sregistry says it's the correct item for the car.
Sent from my SM-G988B using Tapatalk
Sent from my SM-G988B using Tapatalk
1970 911T, Signal orange (Restoration thread)
1988 3.2 Carrera backdate, Black
2001 996 Turbo, Lapis blue (am I allowed to put that here?)
I'm looking for a pre-impact bumper 911S or other high-revving 911 to restore - please let me know if you see one.
1988 3.2 Carrera backdate, Black
2001 996 Turbo, Lapis blue (am I allowed to put that here?)
I'm looking for a pre-impact bumper 911S or other high-revving 911 to restore - please let me know if you see one.