House of Karmann

Ongoing and archived Porsche (and other marques) restoration threads from DDK members

Moderator: Bootsy

Post Reply
greg356a
I luv DDK!
Posts: 860
Joined: Sun Mar 25, 2012 9:16 am
Location: Norwich area
Contact:

Re: House of Karmann

Post by greg356a »

Upgraded brake safety from drums to Porsche 968 fronts and 944 rear disks. To install the front calipers the backing plates needed to be slightly larger. A local race fabrication shop Tig welded in new metal and then machined the offset to ensure the disks are perfectly central. The original M12 fixings have been maintained. Need to organise to powder coat the spindles in silver as originally supplied. Calipers will be completely refurbished and painted red.

ImageIMG_6089

ImageIMG_6090

ImageIMG_6093

ImageIMG_6095

ImageIMG_6097
1963 Karmann Ghia
1959 356A Coupe Outlaw
1957 3.2 Speedster replica
greg356a
I luv DDK!
Posts: 860
Joined: Sun Mar 25, 2012 9:16 am
Location: Norwich area
Contact:

Re: House of Karmann

Post by greg356a »

Back to the body, bit of a shock to see a face less car, and no I am not referring to the bodywork in the background :shock:

ImageIMG_6124

ImageIMG_6122

The the structural part of the body work is complete, must say Keith has done a fantastic job, great panel gaps, clean joints requiring limited leading/ filler and quick.
ImageIMG_6111

ImageIMG_6108

ImageIMG_6112

The whole point of taking the nose off was to straighten the inner wheel arches after it suffered a low impact bump;

ImageIMG_6121

ImageIMG_6115

ImageIMG_6105

ImageIMG_6102

Not sure whether to finish the back bodywork before moving the car back home to do all the mechanical work or not. The boot/ engine lid is being worked on separately for some rust repairs and fitting the twin 356 grills. Without the engine lid cant reset the rear engine bay panel and lower cover. These are also the most expensive panels to replace, needing right hand battery tray, rear engine 1955-1963 panel, lower 1/4 wing bottoms both sides, possibly rear arches.
1963 Karmann Ghia
1959 356A Coupe Outlaw
1957 3.2 Speedster replica
911hillclimber
Nurse, I think I need some assistance
Posts: 18857
Joined: Mon Mar 10, 2008 6:26 pm
Location: West Midlands

Re: House of Karmann

Post by 911hillclimber »

Seems to me to leave it there and get those parts spot-on and the whole shell signed-off with the specialists.
For me that would be a major stage done and dusted and well done throughout.
just my 2d
73T 911 Coupe, road/hillclimber 3.2L
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
greg356a
I luv DDK!
Posts: 860
Joined: Sun Mar 25, 2012 9:16 am
Location: Norwich area
Contact:

Re: House of Karmann

Post by greg356a »

Just been talking to Californian Classics, they are going to send me an update on the engine lid progress and the right hand battery tray is on back order so confirmation of delivery time. Agree it would be best to leave the car and get it finished. I suspect I may not see the modified engine lid for some time, given how busy they are. So may have no choice other than drag it back home and crack on with chassis work.
1963 Karmann Ghia
1959 356A Coupe Outlaw
1957 3.2 Speedster replica
911hillclimber
Nurse, I think I need some assistance
Posts: 18857
Joined: Mon Mar 10, 2008 6:26 pm
Location: West Midlands

Re: House of Karmann

Post by 911hillclimber »

Can you prep the shell all over and fit the underside etc before the rear lid is ready, or will it's absence delay/alter the rear wing gapping etc?
73T 911 Coupe, road/hillclimber 3.2L
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
neilbardsley
Nurse, I think I need some assistance
Posts: 7690
Joined: Mon Apr 16, 2012 4:31 pm

Re: House of Karmann

Post by neilbardsley »

With those brakes your car is going to stop very well

Sent from my M2004J19C using Tapatalk
“A REMINDER. I would be grateful if those members who have borrowed bits from me in emergencies (e.g starter motor, oil cooler, etc) would return them and/or contact me”. – Chris Turner RIP
greg356a
I luv DDK!
Posts: 860
Joined: Sun Mar 25, 2012 9:16 am
Location: Norwich area
Contact:

Re: House of Karmann

Post by greg356a »

The vented disks and calipers and over size bore master cylinder should make for some great stopping given no brake servo. I used this combination on my speedster, which given the light weight stops without locking up.

Unfortunately I need all the panels at the same time to make sure they fit together correctly. About a month left on the front and then bring the Ghia back home. I then need to work out how to get the body up in the air so I have enough space below to work on the pan.
1963 Karmann Ghia
1959 356A Coupe Outlaw
1957 3.2 Speedster replica
RobFrost
Put a fork in me, I'm done!
Posts: 1917
Joined: Thu Jul 08, 2021 8:18 am
Location: Lichfield

Re: House of Karmann

Post by RobFrost »

greg356a wrote:Morning to you all.
lockdown 3: The 356 Coupe waiting in the que for paint and the speedster outlaw waiting final tune with it’s new PMO’s. I have searched endlessly for a 911/ 912/356 project but the starting costs are just outrageously prohibitive and then the parts. What’s left that’s rare, cool and has German heritage? House of Karmann lead me to the lowlight or early 60’s Ghia. A Baywatch body with Crimewatch mechanics? Link pin, swaybars, drum brakes all less than ideal for modern traffic.

The vision is to blend two Coupes from house of Karmann the 1964 VW Karmann Ghia and the Porsche 356C using modern suspension, brakes, drive train
Too much time on google and my next project is ready to go.

Wait only essential travel, so everything stopped.

Staring with a 1964 LHD US import in all of its 47 years of patina. Pete at California Classic helped with a great deal, 64 Ghia, stripped, bagged and tagged, media blasted, epoxy coated, uk registered and a whole bundle of replacement panels. They make a RHD dash board kit. Also secured a 901/07 gearbox from 1969 911S

Image845x300_acd2771684cacf3dd40532902f5d8165

The aim is for something like this Indonesian car, but not as a lowlight.

ImageOK-IMG_8761

ImageOK-IMG_8895

Techy stuff
Imohr a Brazilian VW suspension company make some amazing bolt on suspension systems, RHD double A arm wish bone suspension front and back. Addition of front and rear sway bars and 60mm vw dropped spindles, CSP 4 pot vented brakes at front and 2 pot disks at the back with e-brake. Still exploring if any Porsche early 911 hubs, calliper's will fit on 1968+ vw spindles on front and the 1303 spindles on the back of the Imohr suspension package

Image122446316_407079583786053_3715778384481503670_n

Not got a clue as to engine to use except must be aircooled, look like a 356 with around 150bhp, no subby stuff here. I need to use a 914 flywheel and clutch for the 901 gearbox to fit type 1 or type 4 engine.

Understated wheels, 16” or 17” 130x5 steel look wheels maybe Fuchs

So no budget or time scales, just needs to be another step up in build quality, like my last speedster project will take years, but hopefully be great fun, make some new friends and look great when finished.

Gearbox arrives next week but may not be until March April until travel restrictions are lifted and I can take the trailer down to Californian Classic to pick everything up.

Appreciate, its not a Porsche in the restoration threads, but hope everyone is ok with that and likes a KG
I don't know if you chose an engine yet, but in my youth I had a type 3 with a flat 4 fuel injected. It had about 65hp I think, but it felt pretty fast for daily driving because that engine has quite a bit of torque and delivers maximum power at 2,800 revs. Certainly no hot rod but still a lot of fun and you could get about 30mpg.

Sent from my SM-G988B using Tapatalk
1970 911T, Signal orange (Restoration thread)
1988 3.2 Carrera backdate, Black
2001 996 Turbo, Lapis blue (am I allowed to put that here?)
I'm looking for a pre-impact bumper 911S or other high-revving 911 to restore - please let me know if you see one.
greg356a
I luv DDK!
Posts: 860
Joined: Sun Mar 25, 2012 9:16 am
Location: Norwich area
Contact:

Re: House of Karmann

Post by greg356a »

Rob, I suspect you are right fuel injection is the way forward.

My lead on a 1776 type 1 with hopefully a good case seems to be getting closer to selling. Thinking of rebuilding to 1918cc, high lift cam, followers, lightened flywheel and fuel injection/ crank trigger. But using 356 fram filter, throttle linkage, oil filler etc maybe a solid 140bhp.

So latest parts hoard increasing, thanks to a very kind fellow DDKer is expanding. Great pair of complete 911 swb from 1969 front seats. Hinges need re-chroming and obviously new upholstery. Once I get the chassis back I can now look at fabricating some seat support for the runners

ImageIMG_6191

ImageIMG_6196

Front brakes complete ready for first trail fitting

ImageIMG_6189

ImageIMG_6188
1963 Karmann Ghia
1959 356A Coupe Outlaw
1957 3.2 Speedster replica
greg356a
I luv DDK!
Posts: 860
Joined: Sun Mar 25, 2012 9:16 am
Location: Norwich area
Contact:

Re: House of Karmann

Post by greg356a »

Managed to get hold of a original dash cut out for a 61 KG. Not quite decided on the final RHD dash plans yet, but I have the option for a double peak. At the very least it gives me some more metal for the RHD conversion to allow for any mistakes.

ImageSAM_4751

ImageSAM_4753


I believe the panel on the seats is GRP, no idea what glove box they have used, any clues? Maybe it was part of the kit

Image1 dash

Image2 dash
1963 Karmann Ghia
1959 356A Coupe Outlaw
1957 3.2 Speedster replica
greg356a
I luv DDK!
Posts: 860
Joined: Sun Mar 25, 2012 9:16 am
Location: Norwich area
Contact:

Re: House of Karmann

Post by greg356a »

Catch up Friday. The inner wings have been straightened and the correct gasket inserted between the end of the inner wings and the intersection of the nose cone. No idea why VW did not weld these together but I guess there must be a reason. Both head light surrounds and buckets have new metal. Measurement for the head light bucket position are symmetrical from the ground and measured back to the windscreen. The nose and the under belly section have been cut into place are are being slowly mig welded along the butt joint. So far no sign of any panel distortion due to heat.

ImageIMG_6212

ImageIMG_6213

ImageIMG_6214

ImageIMG_6215

ImageIMG_6216

ImageIMG_6223

ImageIMG_6224

ImageIMG_6228

I guess the front will be wrapped up next week. There may still be time in the guys schedule to look at the back. I think I can get hold of the panels, the most difficult one to get hold of has been despatched. The others I could pick up at the same time as picking up the engine lid. Engine lid modifications are not done but its needed to fit the joining panels.

Really think I have a good shot at making this into a good quality car, for me its really going to be about the small details. Some of my ideas include;
Porsche features
356C Engine lid twin grills
356 Rear shine down number plate light
356C Front indicators, very similar to KG in design
911 R engine lid hinges - not sure about these
356 Leather straps
356 Through bonnet filler
Body colour bumpers with 356 GT aluminium deco strip
356 GT aluminium deco strip to replace side spears.
356 Rear rectangle reflectors - rear lenses already have reflector
912 Steel look wheels but need to be at least 16" to accommodate the 968/944 calipers. They just never made any?
911 Rear ¼ window louvers
356 Period colour
356 Washer jets
KG gauges to look like 356 gauges. There are some green dials already available or use 912 gauges.
911 swb seats – head rests and adjustable / tilt base
356/ 912 Rear view mirror
550 handbrake
911 gear shift
356 look engine
356 GT fuel tank - Most likely get this made
356 Floor mounted headlight switch
356 steering wheel or 912 bat wing
etc
1963 Karmann Ghia
1959 356A Coupe Outlaw
1957 3.2 Speedster replica
User avatar
Bootsy
Site admin and the Boss
Posts: 23842
Joined: Sat Nov 08, 2003 6:09 pm
Location: Norwich
Contact:

Re: House of Karmann

Post by Bootsy »

Sounds very special
1972 911T | 1994 993 Carrera | 1999 986 Boxster | 1990 T25 Camper

Vintage Heuer, Omega, Zenith and other vintage watches - http://www.heuerheritage.co.uk
greg356a
I luv DDK!
Posts: 860
Joined: Sun Mar 25, 2012 9:16 am
Location: Norwich area
Contact:

Re: House of Karmann

Post by greg356a »

Thanks Bootsy, fingers crossed.

Progress this week has seen the front end panels all fully welded in. Keith has also panel worked the right hand wing to remove a lot of the dents, amazing skillzs with hammer and dolly. Also received the unobtanium right hand side battery tray panel. Given its hand made looks like a really good fitting panel. The KG is staying with the guys at Hingham a little longer than planned, to have the rear end panels replaced. This is mostly the rear right side bottom, inner and outer right side 1/4s, rear corner valance x 2 sides and rear engine bay panel. The panels are all ordered from Californian Classics and Pete is sending the panels and the rear engine lid so that the panels can be correctly positioned, before welding.

ImageIMG_6255

ImageIMG_6250

ImageIMG_6248

ImageIMG_6253

ImageIMG_6254

The body fabrication, welding etc will be fully complete in the next few weeks. Well accept the work I need to do with hammer and dolly on the rear left wing to get rid of the dents. I want to have a go at lead loading a few seems, particularly around the front light bezels and front 1/4 seem never done it before so what could possibly go wrong!

I will then turn my attention to the chassis mods, fitting 901 gear box front mounts and gear linkage. Also the rear cradle mount has slightly different angles to the VW Beetle so need to modify to fit the poly bush mounts.

Ordered and received the new 550 replica look handbrake. Looks like a simple fit. However, not one for simple and trying to be IVA compliant I need to fit an switch to allow for a on/ off warning indicator light to be installed on the dash. The handle looks like it needs a series of holes for a race look.

ImageIMG_6257
1963 Karmann Ghia
1959 356A Coupe Outlaw
1957 3.2 Speedster replica
rhd racer
DDK 1st, 2nd and 3rd for me!
Posts: 2030
Joined: Wed Jun 23, 2004 9:47 pm
Location: Nottinghamshire

Re: House of Karmann

Post by rhd racer »

Looking great, excellent progress. It’s going to be super cool…
93 964 C2
99 Boxster 2.5 > 2.7 hill climber

71 914/6 3.0 - gone

'You see Paul, hill climbing is like making love to a beautiful woman. You get your motor running, check your fluids, hang on tight and WHOA..30 seconds later it's all over!' Swiss Tony
greg356a
I luv DDK!
Posts: 860
Joined: Sun Mar 25, 2012 9:16 am
Location: Norwich area
Contact:

Re: House of Karmann

Post by greg356a »

Catch up Friday, progress on the rear end is good. Old panels have been cut out and the new ones screwed in place ready for welding. There is also a small patch needed on the offside rear wing. The gap and fit needs a little tweaking. The boot lock does not quite line up with the catch position which means the rear cross member section needs moving across left a few millimetres. The rear cross member and the right side battery tray are hand made so I guess some variation should be expected. This is really the last of the panel replacement work to be finished before the fun starts. Looks like the ghia will be back home in the next couple of weeks.

Cant wait to start working on fitting the new double A arm suspension and chassis parts. I suspect the Porsche 968 front disc brake conversion may have added some width to the front track. The options seem to be change wheel offset, narrow front axle or wider wings. All these options are going to require a lot of work or compromise if the offset wheel option is followed. Some basic measurements looking at added width of 30mm per side. If I narrow the front axle section it would allow me to tuck the wheels under and end up with a slightly lower killer stance. Anyway running away a bit. Pictures;

ImageIMG_6306

ImageIMG_6326

ImageIMG_6325

ImageIMG_6308

ImageIMG_6322

ImageIMG_6319

ImageIMG_6312

ImageIMG_6311
1963 Karmann Ghia
1959 356A Coupe Outlaw
1957 3.2 Speedster replica
Post Reply