I've never even hear if this before
https://youtu.be/hbspOedhc8I
Sent from my M2004J19C using Tapatalk
Master Cylinder Brace!
Moderators: hot66, impmad2000, Nige
-
- Nurse, I think I need some assistance
- Posts: 7751
- Joined: Mon Apr 16, 2012 4:31 pm
Master Cylinder Brace!
“A REMINDER. I would be grateful if those members who have borrowed bits from me in emergencies (e.g starter motor, oil cooler, etc) would return them and/or contact me”. – Chris Turner RIP
- KS
- Nurse, I think I need some assistance
- Posts: 14947
- Joined: Fri May 07, 2004 3:12 pm
- Location: Cornwall
Re: Master Cylinder Brace!
Solution to a problem that doesn't really exist. Yes, if you push really hard on the pedal – I mean really hard – the floor and bulkhead will flex. I doubt if you'll ever push that hard when driving (it's easy to get carried away when you're sitting in your car in the garage) – if you did, you'd probably lock everything up and slide sideways to a smokey-tyred halt. As long as the floor by the pedals isn't rusted – and it can be, due to water leaking into the cabin from a blocked fresh-air box drain - then I don't think you need worry about it.