I have already exchanged messages with him. No stock
Sent from my M2004J19C using Tapatalk
914 not starting when hot?
Moderators: hot66, impmad2000, Nige
-
neilbardsley
- Nurse, I think I need some assistance
- Posts: 7753
- Joined: Mon Apr 16, 2012 4:31 pm
Re: 914 not starting when hot?
“A REMINDER. I would be grateful if those members who have borrowed bits from me in emergencies (e.g starter motor, oil cooler, etc) would return them and/or contact me”. – Chris Turner RIP
-
Nine One One
- Put a fork in me, I'm done!
- Posts: 1635
- Joined: Fri Mar 01, 2013 11:45 am
- Location: Kernow - good old Cornwall
Re: 914 not starting when hot?
Dellorto DRLA’s have the same footprint as Weber so try these??
https://www.ebay.co.uk/itm/Weber-IDF-De ... boEALw_wcB
Or search for something similar
https://www.ebay.co.uk/itm/Weber-IDF-De ... boEALw_wcB
Or search for something similar
-
rhd racer
- DDK 1st, 2nd and 3rd for me!
- Posts: 2043
- Joined: Wed Jun 23, 2004 9:47 pm
- Location: Nottinghamshire
Re: 914 not starting when hot?
Can you get 40s (or smaller) and make a jig out of wood, pilot hole dead centre and open them up with a hole saw?
93 964 C2
99 Boxster 2.5 > 2.7 hill climber
71 914/6 3.0 - gone
'You see Paul, hill climbing is like making love to a beautiful woman. You get your motor running, check your fluids, hang on tight and WHOA..30 seconds later it's all over!' Swiss Tony
99 Boxster 2.5 > 2.7 hill climber
71 914/6 3.0 - gone
'You see Paul, hill climbing is like making love to a beautiful woman. You get your motor running, check your fluids, hang on tight and WHOA..30 seconds later it's all over!' Swiss Tony
-
neilbardsley
- Nurse, I think I need some assistance
- Posts: 7753
- Joined: Mon Apr 16, 2012 4:31 pm
Re: 914 not starting when hot?
He did offer me some 38mm. I initially said no but am now trying to buy them
Sent from my M2004J19C using Tapatalk
Sent from my M2004J19C using Tapatalk
“A REMINDER. I would be grateful if those members who have borrowed bits from me in emergencies (e.g starter motor, oil cooler, etc) would return them and/or contact me”. – Chris Turner RIP
-
neilbardsley
- Nurse, I think I need some assistance
- Posts: 7753
- Joined: Mon Apr 16, 2012 4:31 pm
Re: 914 not starting when hot?
Bought them. I have also ordered an appropriate 44mm saw drill. If my brother in law will not let me use this overhead drill I might be asking for a favour from the DDK family
Sent from my M2004J19C using Tapatalk
Sent from my M2004J19C using Tapatalk
“A REMINDER. I would be grateful if those members who have borrowed bits from me in emergencies (e.g starter motor, oil cooler, etc) would return them and/or contact me”. – Chris Turner RIP