Suspension drops on one side 912/911
Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin
-
- DDK Newbie
- Posts: 6
- Joined: Wed Jul 29, 2020 2:30 pm
Suspension drops on one side 912/911
I’ve got a 912 that was restored by Canford Classics in 2014,and included the fitting of 130bhp 911 brakes together with other 911 upgrades.
It has now done circa 5000 miles since restoration. The drivers side has dropped around 2.5 inches. I’ve had new Bilstein shock fitted which has improved it slightly,but the car is still falling away on the drivers side. Any ideas?
It has now done circa 5000 miles since restoration. The drivers side has dropped around 2.5 inches. I’ve had new Bilstein shock fitted which has improved it slightly,but the car is still falling away on the drivers side. Any ideas?
-
- Nurse, I think I need some assistance
- Posts: 10293
- Joined: Wed Mar 31, 2004 1:27 pm
- Location: Cheshire
- Contact:
Re: Suspension drops on one side 912/911
I’d be looking for a broken torsion bar...
-
- DDK Fanatic
- Posts: 96
- Joined: Fri Jul 31, 2015 5:48 pm
- Location: Cheshire
Re: Suspension drops on one side 912/911
Front and/or rear?
Front could be the splines on the torsion bar or housing being badly worn (unlikely) or failure of the torsion bar itself.
Rear sag could be torsion bar failure or worse the inner torsion tube splines that hold the bar may have come loose from their welds and rotated.
At least with it being a recent resto all the bolts should be easy to undo!
Front could be the splines on the torsion bar or housing being badly worn (unlikely) or failure of the torsion bar itself.
Rear sag could be torsion bar failure or worse the inner torsion tube splines that hold the bar may have come loose from their welds and rotated.
At least with it being a recent resto all the bolts should be easy to undo!
Oli
1966 912 now with '69 911E 2.0 MFI
1989 944 S2
2009 Boxster S Sport Edition
1998 Land Rover Defender Wolf
1955 Daimler Ferret Mk1
1966 912 now with '69 911E 2.0 MFI
1989 944 S2
2009 Boxster S Sport Edition
1998 Land Rover Defender Wolf
1955 Daimler Ferret Mk1
-
- DDK Newbie
- Posts: 6
- Joined: Wed Jul 29, 2020 2:30 pm
Re: Suspension drops on one side 912/911
Thanks Oli
-
- DDK Newbie
- Posts: 6
- Joined: Wed Jul 29, 2020 2:30 pm
Re: Suspension drops on one side 912/911
Forgot to say it’s sagging front and rear by around 2-3”
Re: Suspension drops on one side 912/911
Have you jacked the front or rear up from the centerline of the car ? In theory if you jack up the front the Centre, if a rear bar is out of adjustment or snapped the car will lean it’s weight on to,it ... and vice versa for the front suspension if you jacked up the rear
James
1973 911 2.4S
1993 964 C2
2010 987 Spyder
1973 MGB Roadster
Its not how fast you go, but how you go fast
1973 911 2.4S
1993 964 C2
2010 987 Spyder
1973 MGB Roadster
Its not how fast you go, but how you go fast
-
- Nurse, I think I need some assistance
- Posts: 10293
- Joined: Wed Mar 31, 2004 1:27 pm
- Location: Cheshire
- Contact:
Re: Suspension drops on one side 912/911
This is how mine looked when the front bar snapped, it was pretty obvious which corner had failed.