I have a set of used parts from an engine originally built in the USA by Andial, and features Mahle 100mm pistons/cylinders. A set of modified cylinder heads with nicely matched squish band area, based on 3.0 SC heads and also configured for MFI. The port could be easily blanked for non MFI configuration
Built from an SC base engine the capacity equates to 3.3 litre shortstroke, or using a 3.2 Crank would make a 3.5 litre.
Price is £2500 (6 pistons/cylinder set and 6 x cylinder heads complete with valves/springs)
If anyone has interest, I'll post some pictures next week
Mahle 100mm P/C set cylinder & heads for 3.3 or 3.5 engine
-
- Me and DDK sitting in a tree! KISSING
- Posts: 2629
- Joined: Fri Apr 18, 2008 5:58 pm
- Location: Sunny Somerset, just above the water....
Re: Mahle 100mm P/C set cylinder & heads for 3.3 or 3.5 engi
Hi Phil,
You have a pm.
Cheers
JW
You have a pm.
Cheers
JW
Life's a single timed run with no practice....
1970 914/6 2.4E/Webers
1970 VW Beetle project
1972 911 Hillclimber 3.2 MFI. Part of the family for 30+ years!
2006 Hymer Merc Starline 630
2000 T4 Van LPG
2000 Golf V5 Estate GT (Greyhound Transport!)
1970 914/6 2.4E/Webers
1970 VW Beetle project
1972 911 Hillclimber 3.2 MFI. Part of the family for 30+ years!
2006 Hymer Merc Starline 630
2000 T4 Van LPG
2000 Golf V5 Estate GT (Greyhound Transport!)
Re: Mahle 100mm P/C set cylinder & heads for 3.3 or 3.5 engi
A few pictures for those that inquired - Please note cam housings are not included in sale
Port sizes are 39mm Inlet and 35mm exhaust
Port sizes are 39mm Inlet and 35mm exhaust
Re: Mahle 100mm P/C set cylinder & heads for 3.3 or 3.5 engi
open to offers on these before they go back into the stores
Re: Mahle 100mm P/C set cylinder & heads for 3.3 or 3.5 engi
still have these for sale, OIRO £2.5k
to recap, its pistons/cylinders/heads and valves as pictured
genuine Mahle, upgrade set for 3.0SC or 3.2 Carrera
to recap, its pistons/cylinders/heads and valves as pictured
genuine Mahle, upgrade set for 3.0SC or 3.2 Carrera