Mahle 100mm P/C set cylinder & heads for 3.3 or 3.5 engine

pht9 · Post by **pht9** » Sat Sep 30, 2017 5:53 pm

I have a set of used parts from an engine originally built in the USA by Andial, and features Mahle 100mm pistons/cylinders. A set of modified cylinder heads with nicely matched squish band area, based on 3.0 SC heads and also configured for MFI. The port could be easily blanked for non MFI configuration

Built from an SC base engine the capacity equates to 3.3 litre shortstroke, or using a 3.2 Crank would make a 3.5 litre.

Price is £2500 (6 pistons/cylinder set and 6 x cylinder heads complete with valves/springs)

If anyone has interest, I'll post some pictures next week

jwhillracer · Post by **jwhillracer** » Sat Sep 30, 2017 9:05 pm

Hi Phil,

You have a pm.

Cheers
JW

pht9 · Post by **pht9** » Sat Oct 07, 2017 4:58 pm

A few pictures for those that inquired - Please note cam housings are not included in sale

Port sizes are 39mm Inlet and 35mm exhaust

pht9 · Post by **pht9** » Sat Oct 14, 2017 10:13 am

open to offers on these before they go back into the stores

pht9 · Post by **pht9** » Sat Apr 04, 2020 4:22 pm

still have these for sale, OIRO £2.5k

to recap, its pistons/cylinders/heads and valves as pictured

genuine Mahle, upgrade set for 3.0SC or 3.2 Carrera

pht9 · Post by **pht9** » Fri May 01, 2020 6:40 pm

Now sold

DDK - Die Deutschen Klassiker

Mahle 100mm P/C set cylinder & heads for 3.3 or 3.5 engine

Mahle 100mm P/C set cylinder & heads for 3.3 or 3.5 engine

Re: Mahle 100mm P/C set cylinder & heads for 3.3 or 3.5 engi

Re: Mahle 100mm P/C set cylinder & heads for 3.3 or 3.5 engi

Re: Mahle 100mm P/C set cylinder & heads for 3.3 or 3.5 engi

Re: Mahle 100mm P/C set cylinder & heads for 3.3 or 3.5 engi

Re: Mahle 100mm P/C set cylinder & heads for 3.3 or 3.5 engi