2.0 mag case chain housing numbers

An archive of any Porsche 911 technical threads

Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin

Post Reply
BD55
Married to the DDK
Posts: 266
Joined: Sat Feb 26, 2005 3:08 pm
Location: Malvern Worcs

2.0 mag case chain housing numbers

Post by BD55 »

After recently recovering most of my engine from Fenn Lane Motorsport i am trying to find out if i have the correct parts to carry on. My engine was stripped down and some of it was still in the crates i had delivered it in, but not all the parts in my crates are for a 2.0 T motor. So if anyone could help me verify or not that the chain cases i have are the right ones i would appreciate it. This for a 68 built 2.0T

These are the casting numbers i have:

Right hand case: 901 105 102 1R number underneath 117280......(Righthand looking from rear of car)

Left hand case 901 105 101 1R number underneath 117270
left hand cover 930 105 105 1R
I am missing the RH cover
Many thanks Simon
64 356C
Lightweight_911
Nurse, I think I need some assistance
Posts: 16793
Joined: Wed Nov 12, 2003 10:48 pm
Location: Worcs/W Mids border

Re: 2.0 mag case chain housing numbers

Post by Lightweight_911 »

.
Those could be your crankcases but you need to check the engine Type & serial numbers to see if they are specifically yours.

That chain cover with the 930 casting number is a later aluminium part ...

.
Andy

“Adding power makes you faster on the straights;
- subtracting weight makes you faster everywhere”
BD55
Married to the DDK
Posts: 266
Joined: Sat Feb 26, 2005 3:08 pm
Location: Malvern Worcs

Re: 2.0 mag case chain housing numbers

Post by BD55 »

Thanks Andy, yes the cover is Ali....My engine is a type 901/16 #6195151 110hp US spec version i believe.... It would make sense that the cases were the right ones but the covers had gone walkies.
64 356C
User avatar
inaglasshouse
DDK 1st, 2nd and 3rd for me!
Posts: 2423
Joined: Fri Mar 28, 2014 9:35 pm
Location: Surrey, UK

Re: 2.0 mag case chain housing numbers

Post by inaglasshouse »

Chain cases seem very likely to be yours. Part numbers are correct for your engine type (MY 69, 2.0T, US spec as you say).

I think the chain case covers correct for your MY69 car are 901 105 105 2R and 901 105 106 1R
With that said, the 930 cover in the box could easily have been yours - it will fit, and it's conceivable that it replaced the original one sometime earlier in your engine's life.

(I feel your pain, re retrieving stuff from Fenn Lane - hope you get back most of what's yours).
BD55
Married to the DDK
Posts: 266
Joined: Sat Feb 26, 2005 3:08 pm
Location: Malvern Worcs

Re: 2.0 mag case chain housing numbers

Post by BD55 »

Thanks for the info Richard. Yes the aluminium one does fit, but i will probably try to find the right ones. Sadly they are not the biggest thing i have missing. But i thought i would start with something relatively easy to find!
64 356C
Post Reply