looking to buy any seat belt anchor mounting plates. These are the flat triangle shape one's used on the end of the webbing that have the mounting bolt hole. Any condition.
Dave
seat belt mounting anchor plates.
Moderator: Miggs
-
- Me and DDK sitting in a tree! KISSING
- Posts: 2697
- Joined: Thu May 21, 2009 2:54 pm
- Location: Kent
seat belt mounting anchor plates.
70T barn find...... to ST.
1998 C2 996 Kettle
1998 C2 996 Kettle
Re: seat belt mounting anchor plates.
New motorsport ones available - not dear (they are square , and all ? plated) - so, as long as you are not looking for originality ..........
Demon tweeks would be one supplier , not cheapest , but .............
Demon tweeks would be one supplier , not cheapest , but .............
Royal Enfield .. still in India
GL 1800 Tour DCT, for pleasure / Fantic 240 Professional - play
Rally 911 (1966) build parked for a while
Rally 928 (work started again - inc serious weight loss programe !)
.... and now another VW Up GTI owner.
GL 1800 Tour DCT, for pleasure / Fantic 240 Professional - play
Rally 911 (1966) build parked for a while
Rally 928 (work started again - inc serious weight loss programe !)
.... and now another VW Up GTI owner.
Re: seat belt mounting anchor plates.
Might be able to help Dave. You have e-mail.
Ian
Ian
-
- Me and DDK sitting in a tree! KISSING
- Posts: 2697
- Joined: Thu May 21, 2009 2:54 pm
- Location: Kent
Re: seat belt mounting anchor plates.
These plates are the flat one's pictured centre left. Even one piece would help....!
Dave
seatbelt parts. by stretch1985, on Flickr
Dave
seatbelt parts. by stretch1985, on Flickr
70T barn find...... to ST.
1998 C2 996 Kettle
1998 C2 996 Kettle
Re: seat belt mounting anchor plates.
3D print?
1966 912 LHD
1980 911 SC Targa
1969 912 RHD in process of restoration
1980 911 SC Targa
1969 912 RHD in process of restoration
Re: seat belt mounting anchor plates.
In steel - why would you (could you ??)newto912 wrote:3D print?
Now that I see what you want - my suggestion was for the wrong part !!
Why not just get them lazer cut and plated - with a bit of work . impossible to tell from original and not dear to do.
(photo with red line round parts you don't want ? is quite ..... err .............. odd ??)
Royal Enfield .. still in India
GL 1800 Tour DCT, for pleasure / Fantic 240 Professional - play
Rally 911 (1966) build parked for a while
Rally 928 (work started again - inc serious weight loss programe !)
.... and now another VW Up GTI owner.
GL 1800 Tour DCT, for pleasure / Fantic 240 Professional - play
Rally 911 (1966) build parked for a while
Rally 928 (work started again - inc serious weight loss programe !)
.... and now another VW Up GTI owner.
-
- Me and DDK sitting in a tree! KISSING
- Posts: 2697
- Joined: Thu May 21, 2009 2:54 pm
- Location: Kent
Re: seat belt mounting anchor plates.
I just used an image i found on the web. I don't have one, hence the description.
70T barn find...... to ST.
1998 C2 996 Kettle
1998 C2 996 Kettle
Re: seat belt mounting anchor plates.
Dave - I may have some of these. Will have a dig around and send you a PM tomorrow.
Gitesh
Gitesh