I've always wondered...
Jonathan, can you adjust ride, camber and track on those arms?
The factory ones have the height and camber with the two eccentrics by the bush end, the toe's by the slotted 3 holes using another eccentric to fine set the toe.
How do you set the camber on the aftermarket ones?
Choosing adjustable spring plates
Moderator: Bootsy
-
- Nurse, I think I need some assistance
- Posts: 19332
- Joined: Mon Mar 10, 2008 6:26 pm
- Location: West Midlands
Re: Choosing adjustable spring plates
73T 911 Coupe, road/hillclimber 3.2L
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
-
- Me and DDK sitting in a tree! KISSING
- Posts: 2681
- Joined: Fri Apr 18, 2008 5:58 pm
- Location: Sunny Somerset, just above the water....
Re: Choosing adjustable spring plates
The arms provide easy ride height adjustment, the camber and toe is done on the eccentrics bolting the spring plate to the suspension arm, just the same as a standard one-piece unit.
JW
JW
Life's a single timed run with no practice....
1970 914/6 2.4E/Webers
1970 VW Beetle project
1972 911 Hillclimber (now 3.5 litre on Management ) Part of the family for 39 years!
2006 Hymer Merc Starline 630
2000 T4 Van LPG
2000 Golf V5 Estate GT
1970 914/6 2.4E/Webers
1970 VW Beetle project
1972 911 Hillclimber (now 3.5 litre on Management ) Part of the family for 39 years!
2006 Hymer Merc Starline 630
2000 T4 Van LPG
2000 Golf V5 Estate GT
-
- Nurse, I think I need some assistance
- Posts: 19332
- Joined: Mon Mar 10, 2008 6:26 pm
- Location: West Midlands
Re: Choosing adjustable spring plates
Sorry, yes, just worked it out!
Been a long time since even thinking about these parts...
Maybe I should stick to the Lola...
Been a long time since even thinking about these parts...
Maybe I should stick to the Lola...
73T 911 Coupe, road/hillclimber 3.2L
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9