SC rear wheel offset?
Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin
-
- Put a fork in me, I'm done!
- Posts: 1940
- Joined: Mon Jul 31, 2006 9:52 pm
- Location: Fife, Scotland
Re: SC rear wheel offset?
Thanks, will check that: didnt look like it was fouling but I am not the most observant!
1990 964 C4, 1999 Boxster 2.5
And..'89 BMW E30 325i Touring. '83 Mercedes 280E. '84 Citroen 2CV. '16 BMW i3 REx. '03 BMW R1100S. '99 Yamaha R1. '79 BMW R100 scrambler.
Member#0336
And..'89 BMW E30 325i Touring. '83 Mercedes 280E. '84 Citroen 2CV. '16 BMW i3 REx. '03 BMW R1100S. '99 Yamaha R1. '79 BMW R100 scrambler.
Member#0336
-
- Put a fork in me, I'm done!
- Posts: 1940
- Joined: Mon Jul 31, 2006 9:52 pm
- Location: Fife, Scotland
Re: SC rear wheel offset?
Ok, thank you and thank goodness for DDK. The spacer bolts looked like they would sit in a recess in the cookies - but they don't, and the edge of them was fouling the back of the wheel, and I guess would have eaten into the metal over time and probably knackered them. Good job I was warned by a knowledgeable person..T911UK wrote:I dont think the wheels will be flush on the spacer! The existing studs will foul on the rear of the cookies as the are completely flat with no recess.
Cheers Man.
1990 964 C4, 1999 Boxster 2.5
And..'89 BMW E30 325i Touring. '83 Mercedes 280E. '84 Citroen 2CV. '16 BMW i3 REx. '03 BMW R1100S. '99 Yamaha R1. '79 BMW R100 scrambler.
Member#0336
And..'89 BMW E30 325i Touring. '83 Mercedes 280E. '84 Citroen 2CV. '16 BMW i3 REx. '03 BMW R1100S. '99 Yamaha R1. '79 BMW R100 scrambler.
Member#0336
Re: SC rear wheel offset?
You're welcome, glad you didn't go out like that, wheel wobble would have been terrible!
http://www.type911.co.uk
Cayenne Turbo S
993 Turbo
Boxster 987 2.7
911 SC Targa backdate 1971
964 1991
912 1968
914 1974
356 1962
Cayenne Turbo S
993 Turbo
Boxster 987 2.7
911 SC Targa backdate 1971
964 1991
912 1968
914 1974
356 1962