I gave the pistons a quick clean up after they were taken out of my engine, and have wiped them with light oil to prevent corrosion. I also asked Russell Lewis (RSR Engineering) to check them over, and there are no problems re-using them in an engine - apart from requiring new rings.
£400 - plus delivery (included presentation box!)
![Image](https://c1.staticflickr.com/3/2821/33193916070_2db9d5bf21_z.jpg)
![Image](https://c1.staticflickr.com/4/3937/33193918810_738267ef6c_z.jpg)
![Image](https://c1.staticflickr.com/4/3804/33420410372_6028a858a6_z.jpg)
I also have a set of iron 2.4T barrels if you're looking for a suitable set to over-bore.
>C