914/6 - Texas GT

Post by **Bootsy** » Thu Dec 08, 2016 8:04 am

He will cover in stickers though

theorangeperil · Post by **theorangeperil** » Thu Dec 08, 2016 8:42 am

Bootsy wrote:He will cover in stickers though

defianty · Post by **defianty** » Thu Dec 08, 2016 8:48 am

914 KEV wrote:
23e Heure wrote:
tp_reading wrote:What is the plan for the body
Body wise:
GT arches on (steel).
GT GRP bumpers front and rear.
Front mounted oil cooler will go in, so front slam panel cut for airflow and louvred panel in front trunk flow.
We are retaining the steel rocker covers and fabricating flared steel ends for them, for a superior fit to GRP rocker covers.
The engine ic urrently on a quick six mount, and we'll replace with a maddogs weld in mount.
New paint all over.
My guess James, it's going to look very much like this example once finished.

James has a particular style in mind for the car and I'm sure he's keen to reveal all in due course, my lips are sealed. However I'm hoping my car will look similar to the car above once finished. I'll start a full restoration/conversion thread in the coming weeks showing the early stages I'm at right now and explaining my disappearance from DDK over the last few years, should anyone have noticed

defianty · Post by **defianty** » Thu Dec 08, 2016 8:49 am

Bootsy wrote:He will cover in stickers though

They've got you sussed out James.

jury · Post by **jury** » Fri Dec 09, 2016 5:02 am

914 KEV wrote:

Bloody Lovely.....I would

23e Heure · Post by **23e Heure** » Fri Dec 09, 2016 6:02 pm

Bootsy wrote:He will cover in stickers though

If only I had a ddk member window sticker to put on it

Post by **Bootsy** » Fri Dec 09, 2016 7:30 pm

It's in the planning stage don't worry

My daughter and I have to sit into tomorrow for a Virgin engineer so she's helping me pack calendars and sort a few packs and stickers out

23e Heure · Post by **23e Heure** » Sat Dec 10, 2016 9:30 pm

sladey · Post by **sladey** » Sat Dec 10, 2016 10:14 pm

They don't look like my proxes - which model are they?

23e Heure · Post by **23e Heure** » Sat Dec 10, 2016 10:29 pm

The new R888R. Medium soft compound

yoda · Post by **yoda** » Sat Dec 10, 2016 10:31 pm

Looking good James - what is the wheel and tyre size combo?

Very cool!

23e Heure · Post by **23e Heure** » Sat Dec 10, 2016 10:39 pm

Thanks! 8x15s on TOYO R888R 225/50/15

23e Heure · Post by **23e Heure** » Mon Dec 19, 2016 3:21 pm

We're on the return leg of an all in one day 1000km round journey to a small town in northern Germany.
If you peer closely you can probably guess what we were collecting...

Darren C · Post by **Darren C** » Mon Dec 19, 2016 3:45 pm

Take the boat, leave the plastic 924 Carrera Gt bodykit

914 KEV · Post by **914 KEV** » Mon Dec 19, 2016 6:10 pm

23e Heure wrote:We're on the return leg of an all in one day 1000km round journey to a small town in northern Germany.
If you peer closely you can probably guess what we were collecting...

So you didn't go to Volker at FSH GRK-Parts?

https://www.f-s-h.com/914_1

DDK - Die Deutschen Klassiker

914/6 - Texas GT

Re: 914/6 - Texas GT

Re: 914/6 - Texas GT

Re: 914/6 - Texas GT

Re: 914/6 - Texas GT

Re: 914/6 - Texas GT

Re: 914/6 - Texas GT

Re: 914/6 - Texas GT

Re: 914/6 - Texas GT

Re: 914/6 - Texas GT

914/6 - Texas GT

Re: 914/6 - Texas GT

Re: 914/6 - Texas GT

914/6 - Texas GT

Re: 914/6 - Texas GT

Re: 914/6 - Texas GT