Pre-A Outlaw replica.
Moderator: Bootsy
-
greg356a
- I luv DDK!
- Posts: 919
- Joined: Sun Mar 25, 2012 9:16 am
- Location: Norwich area
- Contact:
Re: Pre-A Outlaw replica.
Really clever stuff
1963 Karmann Ghia
1959 356A Coupe Outlaw
1957 3.2 Speedster replica
1988 924 Le Mans
1959 356A Coupe Outlaw
1957 3.2 Speedster replica
1988 924 Le Mans
-
Hebster52
- Married to the DDK
- Posts: 296
- Joined: Wed Jul 31, 2013 6:32 am
- Location: Finland
Re: Pre-A Outlaw replica.
Today I drilled the holes as I had drawn them earlier. Also started modding the release latch as it needed some improvements.Hebster52 wrote:As the handbrake was a Prototype and not a finished product I started working on some drillingpatterns...
https://youtu.be/CZhP_3sFwTI
-
Hebster52
- Married to the DDK
- Posts: 296
- Joined: Wed Jul 31, 2013 6:32 am
- Location: Finland
Re: Pre-A Outlaw replica.
Yes. I know there are repro doorframes on the market. But decided anyhow to make them myself...
So I took some 20x20x2mm steel U-profile and cut a buck in mdf... One almost done!
So I took some 20x20x2mm steel U-profile and cut a buck in mdf...
One almost done!
Last edited by Hebster52 on Sat Jan 30, 2016 7:43 am, edited 1 time in total.
-
oliver365
- DDK slapper chatter
- Posts: 463
- Joined: Sun Oct 25, 2009 8:25 am
- Location: cheshire
Re: Pre-A Outlaw replica.
brilliant-
Hebster52
- Married to the DDK
- Posts: 296
- Joined: Wed Jul 31, 2013 6:32 am
- Location: Finland
Re: Pre-A Outlaw replica.
First frame ready for welding...
-
Hebster52
- Married to the DDK
- Posts: 296
- Joined: Wed Jul 31, 2013 6:32 am
- Location: Finland
Re: Pre-A Outlaw replica.
Finally last week got myself around making the other frame too. So next is to weld them and start fitting them to the inner doorskins..
Been too cold in the garage to finish the fiberglass work but now it starts to get warmer so I'll have to continue where I stopped...
Been too cold in the garage to finish the fiberglass work but now it starts to get warmer so I'll have to continue where I stopped...
-
sladey
- Nurse, I think I need some assistance
- Posts: 9311
- Joined: Sat Apr 23, 2005 9:08 pm
- Location: Nottingham, UK
Re: Pre-A Outlaw replica.
Nice stuff
The simple things you see are all complicated
I look pretty young but I'm just backdated yeah
I look pretty young but I'm just backdated yeah
-
Hebster52
- Married to the DDK
- Posts: 296
- Joined: Wed Jul 31, 2013 6:32 am
- Location: Finland
Re: Pre-A Outlaw replica.
Last week I finally got the windowframes welded and also got the innerskins laminated to one piece again. Previous owner had cut them and was going to shorten them as he for some reason thought they were too long for the dooropenings.......
-
Hebster52
- Married to the DDK
- Posts: 296
- Joined: Wed Jul 31, 2013 6:32 am
- Location: Finland
Re: Pre-A Outlaw replica.
Trying out the paper template...
-
Hebster52
- Married to the DDK
- Posts: 296
- Joined: Wed Jul 31, 2013 6:32 am
- Location: Finland
Re: Pre-A Outlaw replica.
Today I started by piecutting and lenghten the bumper...
After this I welded some... :D
After this I welded some... :D
-
Hebster52
- Married to the DDK
- Posts: 296
- Joined: Wed Jul 31, 2013 6:32 am
- Location: Finland
Re: Pre-A Outlaw replica.
Frontbumper almost done.
-
KS
- Nurse, I think I need some assistance
- Posts: 15726
- Joined: Fri May 07, 2004 3:12 pm
- Location: Cornwall
-
Hebster52
- Married to the DDK
- Posts: 296
- Joined: Wed Jul 31, 2013 6:32 am
- Location: Finland
Re: Pre-A Outlaw replica.
Frontbumper fully welded!!! 
-
Richardab1967
- DDK Fanatic
- Posts: 59
- Joined: Tue Jan 01, 2013 12:27 am
Re: Pre-A Outlaw replica.
Great job!
Are you going to use the same idea for the rear?
Are you going to use the same idea for the rear?
-
Hebster52
- Married to the DDK
- Posts: 296
- Joined: Wed Jul 31, 2013 6:32 am
- Location: Finland