Hi
Is there some one having drawings and dimesion so you can builde your own engine yoke, because buying one seems a little expensiv.
So want to try and make my own if some one will give me the messurment.
/Lars
Engine yoke
Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin
Re: Engine yoke
Hi Lars,
If you're going to make your own (like I did), you will be better taking the measurements from your engine yourself. Once the gearbox is split from the engine you can make a template and away you go.
I can recommend cutting out the "C" shape that bolts to the gearbox / engine interface from 20mm thick mild steel.
Hope this helps.
If you're going to make your own (like I did), you will be better taking the measurements from your engine yourself. Once the gearbox is split from the engine you can make a template and away you go.
I can recommend cutting out the "C" shape that bolts to the gearbox / engine interface from 20mm thick mild steel.
Hope this helps.
1970 911t Coupe 2626
"I've started so I'll finish"
"I've started so I'll finish"
Re: Engine yoke
Yes thanks.
It was just that i wanted to have it ready before i take the engine out.
It was just that i wanted to have it ready before i take the engine out.
911S 1974