Fuel Tank coating
Moderators: hot66, impmad2000, Nige
Fuel Tank coating
I need a new fuel tank and intended to buy a Dansk repro tank....good value methinks, unless you tell me otherwise http://www.tech9.ms/classic-parts/drive ... 1615600100
However I was thinking maybe I should coat it in some sort of grey, rubbery, flexible, stoneguard textured style paint? I have a 69 LWB 912
Any thoughts, advice, products ?
However I was thinking maybe I should coat it in some sort of grey, rubbery, flexible, stoneguard textured style paint? I have a 69 LWB 912
Any thoughts, advice, products ?
-
- Put a fork in me, I'm done!
- Posts: 1594
- Joined: Tue Aug 24, 2010 11:56 pm
- Location: Northern Ireland
Re: Fuel Tank coating
I think that there is s Wurth SKS stone chip that most use and can bet got in grey - others will know for sure.
65 911 FIA race car
66 911 RHD restoration
67 911S LHD
74 911 Carrera 2.7 US Spec
79 Aistream Excella 28 MH
97 Bimota Vdue
14 KTM 690R Duke
83 RD350 YPVS
08 Ducati M900
00 Ducati 996SPS
944 T, 3.2 RSR, GT3 - SOLD
66 911 RHD restoration
67 911S LHD
74 911 Carrera 2.7 US Spec
79 Aistream Excella 28 MH
97 Bimota Vdue
14 KTM 690R Duke
83 RD350 YPVS
08 Ducati M900
00 Ducati 996SPS
944 T, 3.2 RSR, GT3 - SOLD
Re: Fuel Tank coating
I'm starting to think it's not the grey I need but black.....
- inaglasshouse
- DDK 1st, 2nd and 3rd for me!
- Posts: 2427
- Joined: Fri Mar 28, 2014 9:35 pm
- Location: Surrey, UK
-
- DDK slapper chatter
- Posts: 432
- Joined: Mon Jan 07, 2008 4:08 pm
- Location: Newquay, Cornwall
Re: Fuel Tank coating
what year is your 911?
Euro car parts, sell the the early tanks for 160 + Vat at the moment. Thats a very good price. Dansk, no internal baffeles, but cheap. ECP 879 33 0011 (Dansk 1684100500).
Someone else can put me right, but from my limited obervations, ive noticed that sometime from 68 - 72 the fuel tanks turned from black to grey, but ive no idea when.
Use a black stone chip, wurth underbody grey is what i would use for the grey (its a grey stonechip with a close colour to OG), and any black for black. For the ultimate in protection, i coated the tank in a epoxy primer first, and then the stone chip on top. That will last a very long time. Get a new fuel tank seal around the base of the tank.
Euro car parts, sell the the early tanks for 160 + Vat at the moment. Thats a very good price. Dansk, no internal baffeles, but cheap. ECP 879 33 0011 (Dansk 1684100500).
Someone else can put me right, but from my limited obervations, ive noticed that sometime from 68 - 72 the fuel tanks turned from black to grey, but ive no idea when.
Use a black stone chip, wurth underbody grey is what i would use for the grey (its a grey stonechip with a close colour to OG), and any black for black. For the ultimate in protection, i coated the tank in a epoxy primer first, and then the stone chip on top. That will last a very long time. Get a new fuel tank seal around the base of the tank.
Re: Fuel Tank coating
we sell the Wurth SKS textured product in Grey here
http://www.tech9.ms/search/Wurth%20(SKS ... 0070%20100
we sell lots of it around the World for exactly the purpose of preparing the Porsche 911 fuel tanks to original finish
I will give you a 10% discount code to order the tank and the Wurth product together, send me a mail to sales@tech9.ms
Thanks Phil
http://www.tech9.ms/search/Wurth%20(SKS ... 0070%20100
we sell lots of it around the World for exactly the purpose of preparing the Porsche 911 fuel tanks to original finish
I will give you a 10% discount code to order the tank and the Wurth product together, send me a mail to sales@tech9.ms
Thanks Phil
-
- Nurse, I think I need some assistance
- Posts: 9424
- Joined: Sat Nov 08, 2003 6:59 pm
- Location: East Sussex
- Contact:
Re: Fuel Tank coating
I think you will find that the tanks were black in 1969. When doing tanks in grey we use 3M Two Part Sprayable Sealer 08823, this gives a smooth, "bobbly" surface, which is very similar to the original finish on grey tanks.
Re: Fuel Tank coating
Nick, I am pretty confident having seen some original unrestored 69 fuel tanks they were grey, they do appear to be darker grey than the later tanks though. Of course the boot area would have been painted blackNick Moss wrote:I think you will find that the tanks were black in 1969. When doing tanks in grey we use 3M Two Part Sprayable Sealer 08823, this gives a smooth, "bobbly" surface, which is very similar to the original finish on grey tanks.
Re: Fuel Tank coating
It was probably a good idea to look at my own tank....doh !! Just back from my store and yes it's black with a textured black paint. Regarding the baffles, I assume that is to prevent "slap" where the fuel rolls around destablising the front end. Anyone have any experience of the Dansk creating a noticeable loss of front end stability?
Re: Fuel Tank coating
Where some scraping has occurred underneath the tank is grey, so I assume they were all grey prior to being treated with the stone chip. Mine also seems to have a mastic seal, is this original?pht9 wrote:Nick, I am pretty confident having seen some original unrestored 69 fuel tanks they were grey, they do appear to be darker grey than the later tanks though. Of course the boot area would have been painted blackNick Moss wrote:I think you will find that the tanks were black in 1969. When doing tanks in grey we use 3M Two Part Sprayable Sealer 08823, this gives a smooth, "bobbly" surface, which is very similar to the original finish on grey tanks.
Re: Fuel Tank coating
Lee, it should have a gasket between the tank and the body to prevent ingress into the boot area, still available to buy, part number 901.504.932.20leewiffen wrote:Where some scraping has occurred underneath the tank is grey, so I assume they were all grey prior to being treated with the stone chip. Mine also seems to have a mastic seal, is this original?pht9 wrote:Nick, I am pretty confident having seen some original unrestored 69 fuel tanks they were grey, they do appear to be darker grey than the later tanks though. Of course the boot area would have been painted blackNick Moss wrote:I think you will find that the tanks were black in 1969. When doing tanks in grey we use 3M Two Part Sprayable Sealer 08823, this gives a smooth, "bobbly" surface, which is very similar to the original finish on grey tanks.
-
- DDK 1st, 2nd and 3rd for me!
- Posts: 2248
- Joined: Mon May 24, 2004 10:54 pm
- Location: london/surrey
Re: Fuel Tank coating
Nick Moss wrote:I think you will find that the tanks were black in 1969. When doing tanks in grey we use 3M Two Part Sprayable Sealer 08823, this gives a smooth, "bobbly" surface, which is very similar to the original finish on grey tanks.
Hi Nick
How many sachets do you use on a typical tank please
Thanks
Jonathan
1974 2.7 Carrera
(full restoration. now as an RS Touring)
1963 3.8 E Type
( 11 years in the making…………………….)
1952. XK120…the next one ……….……..)
(full restoration. now as an RS Touring)
1963 3.8 E Type
( 11 years in the making…………………….)
1952. XK120…the next one ……….……..)
Re: Fuel Tank coating
Two will just do it, three is idealjtparr wrote:Nick Moss wrote:I think you will find that the tanks were black in 1969. When doing tanks in grey we use 3M Two Part Sprayable Sealer 08823, this gives a smooth, "bobbly" surface, which is very similar to the original finish on grey tanks.
Hi Nick
How many sachets do you use on a typical tank please
Thanks
Jonathan
Mick
'Creativity is the product of time wasted' Albert Einstein
1972 RHD 2.4E (ex Bob Watson racer - now in original Tangerine)
1966 LHD swb (Doctors car - now with Mrs. Ferrari in Madrid)
1966 TR4A (now sold and replaced by 1990 944 turbo)
1966 S2a Landrover
1972 RHD 2.4E (ex Bob Watson racer - now in original Tangerine)
1966 LHD swb (Doctors car - now with Mrs. Ferrari in Madrid)
1966 TR4A (now sold and replaced by 1990 944 turbo)
1966 S2a Landrover
-
- DDK 1st, 2nd and 3rd for me!
- Posts: 2248
- Joined: Mon May 24, 2004 10:54 pm
- Location: london/surrey
Re: Fuel Tank coating
Thanks Mick
Think that might be perfect for a winter refurb project.....
Think that might be perfect for a winter refurb project.....
1974 2.7 Carrera
(full restoration. now as an RS Touring)
1963 3.8 E Type
( 11 years in the making…………………….)
1952. XK120…the next one ……….……..)
(full restoration. now as an RS Touring)
1963 3.8 E Type
( 11 years in the making…………………….)
1952. XK120…the next one ……….……..)
Re: Fuel Tank coating
Sorry Jonathan - should have mentioned they use a special gun to apply (with a compressed air supply). Gun looks like a schultz gun, but isn't. About £30 I think unless you can borrow one (like I did)jtparr wrote:Thanks Mick
Think that might be perfect for a winter refurb project.....
Mick
'Creativity is the product of time wasted' Albert Einstein
1972 RHD 2.4E (ex Bob Watson racer - now in original Tangerine)
1966 LHD swb (Doctors car - now with Mrs. Ferrari in Madrid)
1966 TR4A (now sold and replaced by 1990 944 turbo)
1966 S2a Landrover
1972 RHD 2.4E (ex Bob Watson racer - now in original Tangerine)
1966 LHD swb (Doctors car - now with Mrs. Ferrari in Madrid)
1966 TR4A (now sold and replaced by 1990 944 turbo)
1966 S2a Landrover