914 engine problems - please be gentle, I am new!

[MdR]

Ben
I have one NOS T4 (914) head - although I can't remember for certain the valve sizes. Would this be of interest if you reused your other good head?

[Bruce M]

The reason for 2 new heads (when one is fine) is the new heads have the smaller camper van valve sizes. A NOS head would be better if matching (1.7/1.8/2.0 are all different)

[MdR]

Ben
The head I have is as follows
022.101.351B
The bore to accept the cylinder is 100mm
Inlet 39.2mm
Exhaust 32.8mm
(As best I can measure)

[Bruce M]

1.7l head. 39.3mm x 33mm valves

[MdR]