engine and gearbox mounts?

[samcro]

ok so i finally grew a pair and fitted some superpro engine mounts to my 71 911T and also a rsr style engine support last sunday which to be fair was easier than i thought,first 911 and all that,my question is can you get the super pro polyurethane mounts that fit to the gearbox?or are they the same as the rear or front engine mounts? i seen a picture on KS thread of his gearbox and it had the purple mounts on it but i can't seem to find much info on those ones,any help would be cool,thanks Andy.

[Nick Moss]

You should have been supplied with 4 identical bush sets, to do the engine and the gearbox mounts, all in one kit.

[samcro]

no it was just a pair for the engine mounts and they are powerflex ones,I'm guessing powerflex do the box separate ?

[samcro]

no power flex don't do the gearbox ones,useless,will have to get the super pro ones now,I'm still learning,the hard way.

[Nick Moss]

You need a second set of whatever you bought

[stretch]

Can you get the geabox carrier bush for the 901/ type 911 dogleg box then. ?

[Nick Moss]

All 901/911/915/G50 use the same bush

[samcro]

your right Nick i do need to get another set of those powerflex ones,i should have just bought the super pro ones.

[KS]

Powerflex supplied both my engine and gearbox bushes... If you read the web catalogue it says how many you need, in this case, two packs (one for engine bar, the other for the gearbox).

http://www.powerflex.co.uk/road-series/ ... /1847.html

[samcro]

yeah its my fault i just bought a pair from ebay for the engine and i thought the gearbox ones were different but it turns out there the same,will order another set,thanks for your help.

[stretch]

I was thinking rubber