I've got the engine out to do a few jobs on my 914/6. Can someone please tell me the correct gap for a Marelli dizzy? I can't find any info on the internet.
Cheers,
AL
Marelli dizzy point gap
Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin
-
neilbardsley
- Nurse, I think I need some assistance
- Posts: 7752
- Joined: Mon Apr 16, 2012 4:31 pm
Re: Marelli dizzy point gap
Sorry I'm not being much help but don't you want to set the dwell angle? It's 50 degrees on flat 4s
“A REMINDER. I would be grateful if those members who have borrowed bits from me in emergencies (e.g starter motor, oil cooler, etc) would return them and/or contact me”. – Chris Turner RIP
-
Lightweight_911
- Nurse, I think I need some assistance
- Posts: 16854
- Joined: Wed Nov 12, 2003 10:48 pm
- Location: Worcs/W Mids border
Re: Marelli dizzy point gap
The recommended points gap for the Marelli distributor is 0.4mm + or - 0.03mm which is ~ 16 thou
Dwell angle is 40 deg + or - 3 deg
Dwell angle is 40 deg + or - 3 deg
Andy
“Adding power makes you faster on the straights;
- subtracting weight makes you faster everywhere”
“Adding power makes you faster on the straights;
- subtracting weight makes you faster everywhere”
Re: Marelli dizzy point gap
Cheers!