I am looking for one early Fuchs centre cap. Condition not imprtant as it will be painted to match the others that I have. Even a damaged one may be ok as I can probably repair.
Also need the 18mm x 10mm adapter that screws into the front of the block on top and accepts the oil pressure sender or switch.
Thanks,
Keith
Need One 3-Prong Centre Cap & Oil Sender Adapter
Moderator: Miggs
-
- DDK Newbie
- Posts: 13
- Joined: Wed Nov 03, 2010 9:45 pm
- Location: Merseyside
-
- DDK Newbie
- Posts: 13
- Joined: Wed Nov 03, 2010 9:45 pm
- Location: Merseyside
Re: Need One 3-Prong Centre Cap & Oil Sender Adapter
Still looking for a single early center cap, condition immaterial as it will be refurbed.
Also still need the oil pressure sender adapter 18mm x 10 mm.
Anybody got either of these that they don't need?
Also still need the oil pressure sender adapter 18mm x 10 mm.
Anybody got either of these that they don't need?