ST front andrear arches (metal)- with pics of them fitted !
-
- Nurse, I think I need some assistance
- Posts: 4206
- Joined: Fri Nov 14, 2003 3:10 pm
- Location: Bournemouth
- Contact:
Hi James,
I hope to be back on that car next week to get it finished. I am fitting mirrors on both doors as I find it very useful for racing. I don't have on the Left yet as I am out of stock of that side.
Thanks
Alan
I hope to be back on that car next week to get it finished. I am fitting mirrors on both doors as I find it very useful for racing. I don't have on the Left yet as I am out of stock of that side.
Thanks
Alan
http://www.canfordclassics.co.uk
Porsche Restoration & Sales
Porsche Restoration & Sales
-
- Nurse, I think I need some assistance
- Posts: 4206
- Joined: Fri Nov 14, 2003 3:10 pm
- Location: Bournemouth
- Contact:
Hi Jim,
From memory it is code 3535 Oxford Blue.
Thanks
Alan
From memory it is code 3535 Oxford Blue.
Thanks
Alan
http://www.canfordclassics.co.uk
Porsche Restoration & Sales
Porsche Restoration & Sales
-
- Nurse, I think I need some assistance
- Posts: 4206
- Joined: Fri Nov 14, 2003 3:10 pm
- Location: Bournemouth
- Contact:
The rear arches look even better now fitted with the correct rear wheels. brand new 9 inch x 15 fuchs I have just detailed.
Nice rear end
Alan
Nice rear end
Alan
http://www.canfordclassics.co.uk
Porsche Restoration & Sales
Porsche Restoration & Sales
-
- Nurse, I think I need some assistance
- Posts: 4206
- Joined: Fri Nov 14, 2003 3:10 pm
- Location: Bournemouth
- Contact:
Hi,
Yes they are 100% anodised, it would leave the wheel unprotected if they are not anodised. I have seen the frosted finished achieved using a mechanical technique, but ours are anodised.
Thanks
Alan
Yes they are 100% anodised, it would leave the wheel unprotected if they are not anodised. I have seen the frosted finished achieved using a mechanical technique, but ours are anodised.
Thanks
Alan
http://www.canfordclassics.co.uk
Porsche Restoration & Sales
Porsche Restoration & Sales
Alan,
Have a pair of 9"fuchs, date stamp 7-73 and would like to have them refurbed. Problem is I could do with them matching rear wheels I already have.(see photo).
As you can see by the photo, the anodising on this wheel looks a wee bit different from yours.Is there any way, in the anodising process you can alter the final result. Hope this makes sense to you!
Regards,
Have a pair of 9"fuchs, date stamp 7-73 and would like to have them refurbed. Problem is I could do with them matching rear wheels I already have.(see photo).
As you can see by the photo, the anodising on this wheel looks a wee bit different from yours.Is there any way, in the anodising process you can alter the final result. Hope this makes sense to you!
Regards,
Last edited by brembo on Wed Jul 13, 2011 8:37 pm, edited 1 time in total.
Regards,
Dougie
Worry is the interest on inevitability !
Dougie
Worry is the interest on inevitability !
Forgot to say,if you could match the finish of the wheel in photo,could you pm me the cost.brembo wrote:Alan,
Have a pair of 9"fuchs, date stamp 7-73 and would like to have them refurbed. Problem is I could do with them matching rear wheels I already have.(see photo).
As you can see by the photo, the anodising on this wheel looks a wee bit different from yours.Is there any way, in the anodising process you can alter the final result. Hope this makes sense to you!
Regards,
Regards,
Regards,
Dougie
Worry is the interest on inevitability !
Dougie
Worry is the interest on inevitability !
-
- DDK Seasoned Poster
- Posts: 23
- Joined: Mon Mar 17, 2008 8:55 pm
- Location: Switzerland
arches
OEM ST flares are not more round?
It seem straight like turbos' arches, dosen't it?
I thought ST 's had no straight line?
tks
I'm interested in a set of F/R if real repro
tks to PM
Fabrie
It seem straight like turbos' arches, dosen't it?
I thought ST 's had no straight line?
tks
I'm interested in a set of F/R if real repro
tks to PM
Fabrie
-
- Nurse, I think I need some assistance
- Posts: 4206
- Joined: Fri Nov 14, 2003 3:10 pm
- Location: Bournemouth
- Contact:
Hi Dougie,
The wheel in your pic looks like standard straight anodised to me. We have done loads of wheels, in fact we have 54 at the moment!
Take a look here for others and the finish. The cost is approx. £160-170 per wheel plus the VAT.
http://www.canfordclassics.com/gallery/ ... ch-wheels/
Hi Fabrie,
Before commissioning these arches as seen on my ST rep, (which were taken from an ST), I was going to modify some turbo arches but they are way off and nothing like original ST. Regarding the straight edge, yes some STs did have no lip/edge but most did. I suspect the none lip arches may have been fiberglass. Just check out the total 911 mag (last issue - nb 73) there are several pics of ST racing, most of which have the lines and straight edge as our ones do.
HTH
Thanks
Alan
The wheel in your pic looks like standard straight anodised to me. We have done loads of wheels, in fact we have 54 at the moment!
Take a look here for others and the finish. The cost is approx. £160-170 per wheel plus the VAT.
http://www.canfordclassics.com/gallery/ ... ch-wheels/
Hi Fabrie,
Before commissioning these arches as seen on my ST rep, (which were taken from an ST), I was going to modify some turbo arches but they are way off and nothing like original ST. Regarding the straight edge, yes some STs did have no lip/edge but most did. I suspect the none lip arches may have been fiberglass. Just check out the total 911 mag (last issue - nb 73) there are several pics of ST racing, most of which have the lines and straight edge as our ones do.
HTH
Thanks
Alan
Last edited by Alan @ CanfordClassics on Wed Jul 13, 2011 10:59 pm, edited 1 time in total.
http://www.canfordclassics.co.uk
Porsche Restoration & Sales
Porsche Restoration & Sales
-
- DDK Seasoned Poster
- Posts: 23
- Joined: Mon Mar 17, 2008 8:55 pm
- Location: Switzerland
ST Flares
Tks Allan
I have no possibilitie to get the mag , can you scan the pages please? I thought it was fiberglass fenders which were straight and steel fenders with straight line....
So in fact, you have done a perfect copy of ST flares? May I have an offer for rear and front parst please( I sent my email on PM)
tks
Fabrice
I have no possibilitie to get the mag , can you scan the pages please? I thought it was fiberglass fenders which were straight and steel fenders with straight line....
So in fact, you have done a perfect copy of ST flares? May I have an offer for rear and front parst please( I sent my email on PM)
tks
Fabrice
-
- Nurse, I think I need some assistance
- Posts: 4206
- Joined: Fri Nov 14, 2003 3:10 pm
- Location: Bournemouth
- Contact:
Hi,
A few pics with day light on the car. If we can find a few more days to spare we are getting close to firing the ST up!
Thanks
Alan
A few pics with day light on the car. If we can find a few more days to spare we are getting close to firing the ST up!
Thanks
Alan
http://www.canfordclassics.co.uk
Porsche Restoration & Sales
Porsche Restoration & Sales