Does anyone know the thread size/pitch for the large bolt that connects the lower end of the rear shock absorber to the banana arm?
Many thanks
Thread size
Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin
-
- Nurse, I think I need some assistance
- Posts: 10275
- Joined: Wed Mar 31, 2004 1:27 pm
- Location: Cheshire
- Contact:
With later alloy arms it's a M14 x 1.5, M12 nut and bolt before that.
ref my thread (!) from the other week:
http://www.ddk-online.com/phpBB2/viewtopic.php?t=31940
ref my thread (!) from the other week:
http://www.ddk-online.com/phpBB2/viewtopic.php?t=31940
Info from PETJohnS wrote:Thanks. I've just switched over to steel banana arms to ali ones. The bolt securing the lower shock absorber mount to the arm is the same one that fitted the steel one - but its too long buy about 10-15mm. Does this make sense? The ali banana arms are 76 period by the way
900 082 018 02 M12 X 1.5MM X 85MM UP TO 1971
900 082 049 02 M14 X 1.5MM X 95MM 1972 TO 1973
900 082 054 02 M14 X 1.5MM X 85MM 1974 ON
Hope that helps.
Kind Regards
John
1970 2.2E Coupe.
2004 996 GT3 mkII
2015 Skoda Octavia VRS TSI DSG.
2021 Toyota GR Yaris Circuit Pack
1970 2.2E Coupe.
2004 996 GT3 mkII
2015 Skoda Octavia VRS TSI DSG.
2021 Toyota GR Yaris Circuit Pack