Wanted: Rear Fuse Box Cover

72911E · Post by **72911E** » Thu Jul 29, 2010 5:01 pm

Hi All,

Looking for a rear Fuse box cover and the 2 screws that hold it on.

Thanks
Derek

Highfield · Post by **Highfield** » Thu Jul 29, 2010 7:48 pm

Derek

I have a fuxebox cover but they are still available new - the knurled screws are not, and I bought a repo set from a chap in Australia - think through the Early S Registry

Ian

72911E · Post by **72911E** » Fri Aug 06, 2010 12:20 pm

myatt1972 · Post by **myatt1972** » Fri Aug 06, 2010 9:03 pm

good old e-bay !

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... K:MEWAX:IT

tanick · Post by **tanick** » Fri Aug 06, 2010 10:22 pm

I seem to remember getting one from Roger Bray a couple of years ago for about £7.

72911E · Post by **72911E** » Fri Aug 06, 2010 11:03 pm

Thanks

I need to go down to OPC Chiswick in the morning to collect the heat exchanger hoses I ordered.

Any idea of the part number for this fuse box cover and will check with them.

72911E · Post by **72911E** » Fri Aug 06, 2010 11:17 pm

You're right Nick.

$15 here so should be under a £10 in UK.

http://www.stoddard.com/shop/SHOPEXD.ASP?id=3755

Will pick one up tmr if they have one.

72911E · Post by **72911E** » Sat Aug 07, 2010 2:28 pm

£8.40 for a new one from your local OPC.

tanick · Post by **tanick** » Mon Aug 09, 2010 3:35 pm

There you go. I remember being very surprised that they still made them.

I also seem to remember having to shape it by putting it in boiling water as it was very 'flat'