Fibreglass Long Bonnets

[fetuhoe]

We are now producing fibreglass long bonnets of the following type:

Type 1: Foam Cored Long Bonnet with 2 x latch positions.

This bonnet can be fitted to a short bonnet car without need to change front panel. A small mod is needed to the latch to extend the lever and a sketch can be provided.

The second latch position is moulded so this bonnet could also be fitted to an early car with correct front panel.

Type 2: Foam Cored Long Bonnet with standard latch position

This bonnet is a direct replacement fopr an early long bonnet.

The foam core improves stiffness of the bonnet with little additional weight.

The stiffness of the bonnet is similar to a standard steel component and reduces the high speed delection that can occur with single skin gglass fibre bonnets.

All bonnets are finished in light grey gel coat.

Please send PM for pricing

[francismurphy]

Hi ,
I will be emberking on a retro finish 80s 911 soon and will need all the bits!!
Coukld you please let me have all information on the pricing.
Thanks
Francis

[elliot]

I could be interested, any chance of pic of the inside I'm fitting a 4" central fuel filler, and the only one i've seen so far had cross ribs where i need to put a 6" hole. and an idea of the price?

Many thanks Brian.