Pre-A Outlaw replica.
Moderator: Bootsy
-
- DDK slapper chatter
- Posts: 462
- Joined: Tue Oct 22, 2013 8:37 am
Re: Pre-A Outlaw replica.
That horn button looks astonishing!
Again a great job...
I'm lovin' it!
Again a great job...
I'm lovin' it!
It's better to burn out, than to fade away
- Nige
- Nurse, I think I need some assistance
- Posts: 6604
- Joined: Wed Nov 26, 2003 9:11 pm
- Location: Denby, Derbyshire
Re: Pre-A Outlaw replica.
Was the shape just sanded out by hand as it all looks very even.
Great stuff.
Great stuff.
Re: Pre-A Outlaw replica.
Yes. All sanded by hand.
Re: Pre-A Outlaw replica.
Respect!!!!!!!!!!!!
I love the smell of burnt rubber and hydrocarbons in the morning, it smells of......victory.
-
- Nurse, I think I need some assistance
- Posts: 6495
- Joined: Sun Sep 02, 2007 9:53 pm
- Location: Midlands
- Contact:
Re: Pre-A Outlaw replica.
Very cool wheel and horn work!
----------------------------------------------------
Jason
https://www.SweepingHand.co.uk
Rolex & Omega Watch Purchases & Sales
Jason
https://www.SweepingHand.co.uk
Rolex & Omega Watch Purchases & Sales
Re: Pre-A Outlaw replica.
Made a testbracket out of suitable hardboard according to the CAD drawing just to testfit and measure the position of the caliper vs. rotor.
The caliper sits perfectly. I recieved a measurement from a collegue who have a Polo M2/3 just to confirm the same measurement. He measured 17,5mm to the bracket surface and I have now 18mm. He said that I could take half a millimeter off his due to wear so my guestimation was pretty close anyways... :D
Thanks to the confirmation measurements I now ordered a pair of brackets in 10mm thick steelplates.
The caliper sits perfectly. I recieved a measurement from a collegue who have a Polo M2/3 just to confirm the same measurement. He measured 17,5mm to the bracket surface and I have now 18mm. He said that I could take half a millimeter off his due to wear so my guestimation was pretty close anyways... :D
Thanks to the confirmation measurements I now ordered a pair of brackets in 10mm thick steelplates.
-
- Put a fork in me, I'm done!
- Posts: 1512
- Joined: Thu Sep 28, 2006 8:23 pm
- Location: midlands u.k
Re: Pre-A Outlaw replica.
Nicely done....
how much clearance from wheel to calliper?? looks tight
how much clearance from wheel to calliper?? looks tight
Rich
DDK Member 0547
Evolving Speedster Build
DDK Member 0547
Evolving Speedster Build
Re: Pre-A Outlaw replica.
Enough.. :D I dont have a photo of the parts fitted to wheel but I also checked that and it is more than enough.
Re: Pre-A Outlaw replica.
Yesterday I finally recieved the second pair of Mangels repros. These are 4,5 wide ones with altered offset from 25mm to I'd say about 35mm.. (the silvergrey one)
Here compared to a stock 4,5 Kronprintz to the right, and a 5,5 wide Mangels with offset 15mm to the left.
Far left is a Hebsterwerks 6,5 wide one with an offset of about 45-50mm..
Today I let the anglegrinder loose on all the Mangels...
To the left is now the 5,5 wide ones with about 40mm offset instead of the standard 15mm and to the right the centers from the 4,5 wide ones that will be fitted into the 6,5 wide arches with an offset of about 45-50mm...
Here compared to a stock 4,5 Kronprintz to the right, and a 5,5 wide Mangels with offset 15mm to the left.
Far left is a Hebsterwerks 6,5 wide one with an offset of about 45-50mm..
Today I let the anglegrinder loose on all the Mangels...
To the left is now the 5,5 wide ones with about 40mm offset instead of the standard 15mm and to the right the centers from the 4,5 wide ones that will be fitted into the 6,5 wide arches with an offset of about 45-50mm...