DDK - Die Deutschen Klassiker

internet,

HI alfietom is the gearbox still in the car??, if it is you can change the seal BUT not the bush, as it is pressed in to the end case, I have bushes in stock (just need to find them) that is how often I change them, is there play in the selector shaft rod that needs the bush changing? I have never c...

HI Graham I see from your (not working) Vid link that you have a early Ally case engine in your car, is it the original engine? the noise could be the inter-gear not been or needs the adjustment checking, while you have the chain case covers off checking the chain tensioners, just check the end floa...

HI

enjoy https://www.youtube.com/watch?v=G27iVH0Yt8U

please check out the H&S, what is the lowest driving age for a tractor in Germany??

regards mike

HI Graham (top post) is the noise just at idle when hot-hot and the oil pressure is 4 bar at 4,000 rpm, if so there could be some wear in the Ally inter-gear gear that drives the timing chains, if the Ally gear has some wear on it or the inter- gear bearings have some wear, you can get a dull consta...

HI Greg

the wiring is;

+ = ignition live

31b = wire from the gearbox, usualy the green or brown/red

-- = earth, brown, you will need a earth wire AND one wire from the gear box on hear also


A = a signal take off for the Automatic Speed Control, control unit

regards mike

HI AL

sent you a PM, please consider the others intrested, thanks for letting me know

regards mike

HI Al

if Angus passes on the sports seat, I will be intrested it them as thay are, as some one has swaped out the ones in my SC Sport for Std ones

regards mike

Hi newto912

a bit on the pricey side but try 369 02 107 4 at 0.95 and a price of £17.70 from Porsche + vat

you could try a VW part at 021 105 281 £4.47 +vat for a 0.30 X 2

and a 012 105 289 £4.47 +vat for a 0.38 X1,

poss from VW Heritage or try the VW dealer

reagrds mike

HI BILLY BEAN

corse or fine thread , which do you require

corse is 999 070 004 03 at £6.01 +vat each from porsche

fine is 930 101 172 01 at £10.22 +vat each from Porsche

I have used oily or plated

regards mike

HI Simon

is the tinwork for the T or the E engine, Carb's or Injection

are you looking for front, back both sides, heater out lets, cylinder tinwork and clips

regards mike

HI Maurice

I can supply you 914 drive shaft gaskets, new

give me a ring or drop me a E-mail.

reagrds mike

HI Paul

the 3.2 will work with the SC crank, or I have piston (SC) if you would like to use them in the 3.2 cylinders (if the 3.2 cylinders are OK), if not I could have SC cylinders also

give me a ring 015395 67959

I take it you may have a 1974 black car with the engine in bits??

regards mike

HI Paul


would that be SC or 3.2, as both a 95mm

regards mike

HI Mark

try 901 571 919 00 price at £2.68 + vat each

or I did find this clip 477 819 343 £1.39 +vat each , this was on the cross over cable

reagrds mike