DDK - Die Deutschen Klassiker

After researching bearing shells on pelican parts I decided to try the HM Elliott coating to enable me to reuse my existing crank without a regrind however it is now evident this isn’t possible therefore I need to sell my new coated bearing shells. HM Elliott will not post to the UK so it was very c...

Thanks!

Would anyone have a spare Pallas bucket and bezel I could borrow so I can get it 3D scanned?
Thanks, Jack

Thanks Gary I will give them a call in the morning.

Following a dry build of the bottom end (1976 911 2.7 7R) it appears the crank is nipping up. The crank has been ground back .25mm and DTI spot on for each journal. Plastigage also shows ideal clearances. I can only presume the case is warped, I believe best course of action is to skim the mating su...

apologies for blatant rip-off but saves me having to repost it and the PH crew don't seem interested in it... probably not enough pop-pop-bang-bangs https://www.pistonheads.com/gassing/topic.asp?h=0&f=47&t=1884993 I will keep updates here and Impact Bumpers now that work is progressing at a ...

Sold, cheers Ronnie

Thanks replied

Hi does anyone have a spare bracket (condition not important as long as in one piece) to suit a 1976 911 2/7

Thanks, Jack

Sold! Thanks ddk

last offer before ebay! £250 for all gubbins. cheap compared to standard diz.

last discount before ebay! £150 incl a usable loom

Further investigation from someone far more knowledgeable than me who also says the shells are for post '74 7R cases (but may fit some '73) as the tab is on the other side. 901 101 138 58 is #8 bearing std outer -0.50 inner 911 101 133 70 +0.25 outer -0.25 inner 901 101 131 70 +0.25 outer -0.25 inn...

Wanted to modify so not worried about condition! Cheers

Photo of parts