DDK - Die Deutschen Klassiker

Welded together a couple of jcb bucket shims

Sent from my SM-G988B using Tapatalk

I cut the head off this high tensile bolt. https://uploads.tapatalk-cdn.com/20240504/13b5754f7582d5835b8009f7cb96fd4c.jpg The sleeve I cut goes perfectly over this 19mm impact socket. https://uploads.tapatalk-cdn.com/20240504/05e976732febfd544272d18f89deaef1.jpg https://uploads.tapatalk-cdn.com/2024...

Round two if anyone enjoys guessing... this one's dead easy. I put this old taper drive drill bit in a makeshift lathe. https://uploads.tapatalk-cdn.com/20240504/310f576e706bc1e571e4750f2717d947.jpg Cut the end off https://uploads.tapatalk-cdn.com/20240504/ef3dc5456d5157fd03813964cac9998d.jpg And cu...

From Wikipedia, some guys told a story of their shill bidding and... Walton and his associates were charged and convicted of fraud by federal authorities for their eBay shill bidding. Probably because it deceives buyers regarding the market value because one reason for buying in an auction is you kn...

And 62.03mm across the engine bore although that was trickier to measure. Not sure what spec is. Maybe it says in Dempsey.



Sent from my SM-G988B using Tapatalk

I don't have any experience what the crank bearings should look like. All were seated properly, no rotation. They appear to be mint on the inside. https://uploads.tapatalk-cdn.com/20240502/ea001695d32eb189b04f48660059e8f0.jpg But on the outside they appear to show signs of oil erosion, which is a su...

By way of counterpoint - the 700,000 mile Porsche 911. Track days, regular oil changes and used daily. Although to be fair, it did have an engine refresh after 383,000 miles to deal with some minor oil leaks.

https://www.hotcars.com/high-mileage-porsche/

matteo68 wrote: ↑Sun Apr 21, 2024 4:27 pm Bicester Scramble for me today

Stunning. Looks like Signal Orange there.

Is it legal to take bids off the wall under the reserve in the US? If so maybe it was that. Deceives buyers as to the value, since they think there are other buyers out there at that money. So I should think you could pin a fraud charge on an auctioneer if you could prove it. Sent from my SM-G988B ...

How can you rebuild an engine without cleaning it and leaving broken piston in it? Pistons changed without splitting the case and they thought they got away with it? What do you think caused the oil starvation? Sealant or broken piston? Sent from my 22011119UY using Tapatalk Looks that way - either...

Current plan I think is to put it back together with JE 10.5:1 86mm pistons in Biral cylinders. Twin plug the heads, but run it single plug unless needed. Possibly have some case work done. Being 1970 I think it has no piston squirters which might be helpful on a 10.5:1 engine. Not sure about shuffl...

I've yet to take apart the cam assemblies and the rest of the engine, but tentatively I'd say the engine was run for a short while after a piston replacement, possibly recently rebuilt, and failed due to chunks of piston left in the engine. The heat, fatigued piston rings and broken valves cutouts i...

I'm no expert but the crank journals and shells look to be in good shape to my eye. https://uploads.tapatalk-cdn.com/20240427/d5e8dea232eceea099622666acaf6a2c.jpg https://uploads.tapatalk-cdn.com/20240427/f73ae68e000a6cbd9e6f2547229c1f0b.jpg https://uploads.tapatalk-cdn.com/20240427/f04ca6b98725bdfe...

Good and bad sides of oil pump. https://uploads.tapatalk-cdn.com/20240427/ecb0aef283d22c9555c448ac1338169e.jpg https://uploads.tapatalk-cdn.com/20240427/93fa1d25ee993cd6face1d0ea0a76cc1.jpg https://uploads.tapatalk-cdn.com/20240427/847ecbc99d6d487e17b3ab998a526178.jpg https://uploads.tapatalk-cdn.co...

Sorry I didn't get a photo, but when I got into the 2nd chamber of the oil pump, I found no aluminium chunks. But it was starved of oil, and the oil pump case was corroded, causing it to be jammed. It turns out I could probably have forced the crank round without doing too much damage to anything. T...