DDK - Die Deutschen Klassiker

Is there any chance of posting a picture of the Oil gauge if you still have it?

Step4d - i've sent you a PM

Hi all I don't suppose anyone has any decent front shocker inserts lying around ?? Part number 901 341 903 00 Car - 1971 911 2.2T Koni struts front shocker inserts2.jpg Leaky unmatched pair on left of attached picture, mine don't have the insert on the bottom as seen on the one on the right Thanks

Surplus to requirements - pair of drive flanges

Part number 914.332.223.01

Happy to post if required

£50 for the pair

Hi there Marleybones

I noticed you had posted to somebody that you may have some throttle rods ?

I'm sure i have 2 rods missing from my Solex set up

I'm sure one looks like attached pic - if you have one?

Thanks

Jeff

Hi Will - i've txt you.

I've removed the CV joints from one shaft to clarify the dimensions

Shaft length is 475mm
Shaft outer spline diameter 30mm
Shaft centre outer diameter 26mm

These would indicate that the shafts would fit 69 - 75

CV joint outer diameter 108mm
CV joint width 30mm
Part number as per picture

I don't suppose anyone has a pair of driveshaft flanges to fit my '71 911T do they??

Part number 901.332.232.00

Thanks

As i bought these not 100% sure on what model they were removed from, i 've just had some feedback from someone regarding the model

The part number on the CV joint is 911.332.030.01 - according to a post on Pelican these could be turbo shafts ??

Pair of rear driveshafts

These are the non ABS, 6 bolt mounting versions

All joints feel free and non of the CV boots are split

£225 plus £20 postage if required

RobFrost - I'm not sure if it's any help but i have just bought a momo wheel & hub for my 71 and it looks exactly the same as the one with the pin. I can get part number off the box if it helps?

Hi there, i'm not too far from you (East Cleveland)
Im on with building a 71 targa 2.2 and my mate has a 69 912
Good luck with the rebuild.

Hi Peter - PM sent

Is the targa hoop seal the one which fits at the rear of the windscreen please? if can i get it as well as one of the rear bumper/lid seals, the blower cover and the rough engine seal

Hi there
If the silver 2 hole centre cap is still available can i get it please?
Cheers