DDK - Die Deutschen Klassiker

Adrian have a look here https://www.912bbs.org/forum/threads/fog-light-harness-connections-to-fuse-block.51198/ In fact any question you have about a 912 , you will find on this forum If you are not already a member, I would suggest joining and also use your name in your username as they can be a bi...

Have sent PM

Sorry , machine work for the 2.2 kit, not the 1925s

I thought about this for a while for a 912 engine I plan on rebuilding. I am pretty sure , if you look on the Willhoit website he goes though the steps needed to add his kit to a standard case, I do recall machine work to the case will be required. Perhaps you could ask whoever did the work on the 3...

willhoit kit

https://willhoit-auto-restoration.mybig ... ngine-kit/

see parts diagram for your car and that might help you work where all the springs/rods etc go https://www.design911.co.uk/pages/diagramsBrowser.aspx?categoryID=7&diagramID=1826 I have taken various pics, but for some reason my phone is not talking to my laptop feel free to text me your number/em...

I have rebuilt a RHD LWB one, which is pretty much the same except a different break switch(SWB does not have one on the pedal cluster)
will dig it out in the next few days
Andrew

hi there I am interested as long as you can confirm the integrity of the exhaust my old exhaust looked ok , but was backfiring due to pin holes could you send me a video of it running if all good how does 115 posted sound? I think you made me an offer on ebay save you the sellers fee! Thanks Andrew ...

Hi Mike
thank you so much for the offer
since I have been contacted by Roger (rft218) and he has offered me some complete cards without the speaker holes
so no need to send them
what a great forum this is
regards all
Andrew

Dave
could I have the front bonnet hinges
the SWB heater sliders and the key blank
Thanks
Andrew

Join 912 BBS
do a search you will get so much information there
eg
https://www.912bbs.org/forum/threads/id ... wer.54070/

Hi Ralph
I am restoring a 69 RHD 912 and one thing that was missing were the door cards
I dont want to step in if you have already agreed to post to Mike
but if you have not got that far I would take them
thanks
Andrew

Hi Andrew do the pistons you have have an offset wrist pin as the original Mahle pistons? if they do be careful with their orientation do you have a Pellow book to aid with rebuild? this is a great resource for general maintenance and tolerances if you don't already have it https://www.912bbs.org/fo...

I have a precision matters FF kit, but keeping it for my next project I currently have a shasta FF kit on my engine, they both involve modifying the oil pump area in the 3rd piece, I have instructions for the PM kit somewhere and can dig it out it is not complicated to do, and if you can rebuild a 9...

Hi Andrew
If it helps,I have a Stahlwille torque multiplier you can borrow
Andrew