DDK - Die Deutschen Klassiker

Ideally it will get a turbo too (Ruf fanboy who wishes he’d bought CTR#29 when I could have afforded it) but finding a way to package the intercooler discretely is tricky.

Bit closer photo since you were kind enough to ask….

Hope everyone made good use of the lovely weather over the weekend. Doubt we can squeeze that many more days out of it….. unless you live In Cornwall. Great pic and makes a change of just seeing pics of slammed type2’s . What’s the specs of the cars or are they stock ish Thanks [emoji4] The red car...

Hope everyone made good use of the lovely weather over the weekend. Doubt we can squeeze that many more days out of it….. unless you live In Cornwall.

The bugpack one is NLA. CB Performance do one with small gears (21mm on the pressure side). There is a nice but expensive German pump from TP. Fitting them behind the stock cooling fan shroud might be a problem. I think Jim C also had the original Salzburg rally pump remade but that was designed for...

It’s got Air Con too

Have a look at campershack on Facebook. No personal experience. However they are used to the problems with getting parts for those engines (camshafts are unobtainable in the correct spec for the DJ and rebuilders do throw in the 1.9 cam which isn’t the same). Similarly, the clips on the rocker shaft...

Creality Ender3 V2. With 2 upgrades, the Creality “touch” probe which maps the surface of the bed to allow for imperfect level and the Creality “spider” HotEnd which can be run at a higher temp for the Nylon filament. It’s definitely hobby grade & needs careful setup. It’s has a well supported c...

Wheels will be refurbished & probably in black so it should do the job.

Another small design. The OE centre caps don’t fit over the spindle nut so I needed a design with clearance underneath. You can see the nut problem here. https://uploads.tapatalk-cdn.com/20230805/8ebeb26cc9b487b22a8f30f46405cfff.jpg Few measurements & a bit of cad .. https://uploads.tapatalk-cdn...

Are you running sequential injection or batch fire? CB Performance do a cam sync that fits in the distributor bore & gives you that option (hall sensor, so falling trigger signal).

Found my reference material…


http://vdubengineering.com/technical/po ... ersions-2/

It’s the 986 model. https://uploads.tapatalk-cdn.com/20230730/8cef3d849002d37bfe85cb02bef127ff.jpg Do double check the sizes etc. On my beetle, I ended up going a slightly different route using the same rear 944 hub / handbrake mech / caliper mount, with early 944 rear disc and boxster 986 (2.7) rea...

The later rear arms used a wider hub and the disc bell was extended to suit. So the turbo rear discs won’t align with the arm & caliper on the early hub. There was a one year only version of the turbo rear brakes (‘86) which used a smaller hub so the disc bell is less deep. You have a good chanc...

Small update. This is now on the road & I’ve been tuning it. Fairly happy so far although the rebuilt engine is still being run in (not gently!). It’s Honda CBR throttle bodies / injectors/ fuel rails, with a load of 3D printed parts to make it fit, with a speeduino ECU. https://uploads.tapatalk...