DDK - Die Deutschen Klassiker

I would love to join you if the timing works out

356 will be at PRS on 25 Sept so I hope to get it back quite soon after !

So could do an October drive

Regards Jeremy
1957 356A T1

Hi all Sun came out recently and I am glad to say I had the car ready for it !! After taking the front calipers off and really getting a good look at them - they seemed to be sitting at a 0.9mm angle off centre and that was causing the pads to wear very oddly. So everything is now straightened up wi...

Hi Paul

Hope you are well ?

I would call PRS as they have shelves of parts so I would think they have one available

All the best

Regards Jeremy

Hi Karl Thanks for the quick response to my DM that explains what we were discussing about the front end with disc conversions and spindles On the rear discs, I am in touch with PRS about bearings, but I did also see a castle nut washer / spacer which might help give the castle nut more thread to be...

I had a look and in the spindles conversation Hashman said I need to order the 356B later bearings for the rear discs as those supplied seem to be pre A bearings

This could be the problem - I will message him and see if he has any more information !

Thanks

Jeremy

Hi Thanks that does ring a bell that someone mentioned using a certain bearing - I will investigate as I think it was during a conversation re the EMPI front spindles ??? Yes I am sure we used the shim and spacer, but it sounds like I have to open it up to double check !! If the space was missing th...

Hi I have been working away installing the CSP brake discs I treated myself to earlier in the year. The fronts seem to be ok but seem a little noisy, I am hoping this is some sort of bedding in noise ? My main problem is that I was getting quite a lot of noise from the rear - screeching and what sou...

Ok great Will do !

I have had a look into this further and it would seem that all EMPI distributors should be able to supply the spindles.

We have several in the UK - so the next step would be to ask one of them how much that charge !!

All the best

Regards Jeremy

wow those might compliment my new CSP disc brakes very well !!!

Regards Jeremy

Very interesting

Do we know any idea of a price for each side ?

Regards Jeremy

I have just got my Koni shocks back from I G Racing who specialise in Koni servicing and rebuilds

Very happy with their service

Great thanks a lot Mike

That does help me and I will try that when they come back from their rebuild at Koni

I will give an update once I have tried them out

Regards,
Jeremy
1957 356a T1

Ok I will give that a go when I get them back

Regards,
Jeremy
1957 356a T1

Which Eric was that Hugo ?

I happen to have an Eric Studer motor in the back (supplied by PRS)

All the best

Regards,
Jeremy
1957 356a T1

Cheers Neil

So hard on the front and medium on the rear?

Mike - does that sound about right?!

The shocks have only just gone off, so I have a bit of time before they go back on!

Thanks

Regards,
Jeremy
1957 356a T1