DDK - Die Deutschen Klassiker

[quote=SeanP post_id=674796 time=1707564242 user_id=5517]
Karmann Konnection have one for sale
Phone them rather than do the eBay thing
[/quote]

yes did see that - its an option

[quote=911hillclimber post_id=674794 time=1707558458 user_id=2769]
Sorry, I do not have one. Could have sworn I had one over from a few engine builds, but no.
This was all a long time ago in the mid 90's so memory fading.
[/quote]

No worries thanks for trying

Thanks hillclimber - yes they should be the same

Sorry missed it - thanks

yes thats the part - thats helpful thanks. You dont have a part number do you?

There is a plate bolted to the back of the engine - it covers the fan belt and the main cradle to mount the engine bolts onto it. I need one for a 72 car. Anyone got one they will part with and anyone know what the plate is commonly known as. Cant seem to find one on any search. Thanks

I hope so lol otherwise could get expensive

thats helpfull Andrew thanks - are they there just to mount the carrier?

looking for the bottom engine carrier that covers the fan pulley. Can someone also advise whether the 2 studs at the bottom which come out of the crankcase are just that.....studs? How long are they and are they simply there to mount the carrier plate? Mine have been welded to the carrier so I will ...

Sorry this should be in the pre-74 longhood section - can a mod move it?

looking for the bottom engine carrier that covers the fan pulley. Can someone also advise whether the 2 studs at the bottom which come out of the crankcase are just that.....studs? How long are they and are they simply there to mount the carrier plate? Mine have been welded to the carrier so I will ...

Gap A exists when the rear mounts are bolted in tight and the gearbox mount is bolted in tight - that is why I am perplexed!!! - when looking from the back of the car the engine mounting bar is not level - its higher on the right hand side. the engine mounts car crossmember are the same on both side...

The sketch is very rough. When the engine is in the car and the rear mounts are bolted down there is a gap at A of about an inch. I took it out again and noticed the mounting bracket is higher on the right than the left therefore creating the gap a A. Any ideas? Is the mounting bracket knackered? I ...

Rough sketch