DDK - Die Deutschen Klassiker

Hi Gary,

I too have drilled them out by hand, and also made up a jig that has worked quite well - not really accurate enough as it is only fixed on one stud though. You are welcome to try it if you like. Otherwise I concur with the advice in the previous posts.

Good luck.........Chris

Hi Dave,

Do you need a complete cable or just the inner ? I am sure I have a new inner cable somewhere.

Regards.......Chris

Hi, Probably the flywheel pickups, there are two of them -usually corroded into the mounting bracket on the left hand side of rhe engine/gearbox bellhousing area. You will be lucky if you can remove old pickups without damaging the mounting bracket (£60 +) . The new pickups need to be installed with...

NEW EVENING CLASSES FOR MEN ALL ARE WELCOME OPEN TO MEN ONLY Note: due to the complexity and level of difficulty, each course will accept a maximum of eight participants The course covers two days, and topics covered in this course include: -----------------------------------------------------------...

Hi John, you obviously prefer standard throttle bodies over the RSR throttle slides and trumpets in the second photo. I'll offer £50 if they are now not required !

Regards..........Chris

Hi Adam,

It is the return (excess ) line back to the fuel tank.

Regards.....Chris

Hi Andy,

I have one and can bring it to the Fairmile if you are going.


Regards.......Chris

Hi Vasco,

pm sent

Regards...........Chris

No need to drain oil , but you will lose less if the car is jacked up a bit.
Typical loss about 0.25 - 0.5 litre when doing camshaft seal so you will not lose a lot just removing/refitting the cover.

Regards..........Chris

Hi Nick,

The factory did use hoseclips at both ends - I use stainless narrow type as sold by Wurth etc. I can supply if you need.

Regards..........Chris

Hi all, Very good weather favoured the 8 DDK folk attending: Nick Mike Lewis x 2 Paul Eddie Nick moss Me Excellent instruction, advice and great bacon butties were enjoyed by all. Some humorous moments occurred when I missed all 10 clays at one station and at another, our self-confessed "beginn...

Hi Ian, I have never knowm Pirtek not to be able to supply in the sizes/ptiches that Porsche use , but try Think Automotive in Isleworth,
Middlesex if no joy.

Regards.........Chris

Hi, I have both carb and mfi heads. Send me a PM or phone me for more details.

Regards.........Chris

020 8451 6000w
01932 788021 h
07956 079756 m
ctporsche (Skype)

Hi. Does anyone have a speedometer with working mileometer for sale?

Please ring 07956 079756

Chris

Hi Steve,

I am sure I have one somewhere. Send me a pm or phone 07956 079756.

Regards.......Chris