DDK - Die Deutschen Klassiker

What about the handbrake job done just before the trip?
I can see a tick tick from that before the diff.
Just a thought.

Good going as ever!
11/10 to the wife getting involved, priceless.

What about the front suspension and brakes?

Just my own thoughts as ever Rob. Putting the crank back into an assembled case ans see how it moves ( esp with fresh shells and assy lube) is a great idea and a good procedure when getting ready todo the real build. Never needed a line bore in my 4 engine rebuilds. Those few studs are obviously set...

Odd the output bearing has run on the shaft, but that imho might rumble than tick. I guess the frequency of the tick increases with speed of turn? I’ve had the same swarf on the mag plug in my Lola box, was synchro wear. Fingers crossed for you, but I would expect a total strip soon. I have a Quaif ...

I wondered why you had been so silent!
Change all the bearings and re-shim?

Yes, that could be a bit of a Trade Secret for those earning a living from this stuff.
Rob, does the Dempsey book give some leaders on this?

I started my apprenticeship at James Booth Aluminium in 1968 who made a lot of the aluminium alloys for Concord. The feeling of pride within the factory ( about 2000 employees) was very high, I remember it well. Oddly, the plant is still operating in Kitts Green Birmingham, remarkable! What a machin...

J Leno and a modified '69S 911 by a visitor not a company for a change:

https://youtu.be/no5S9DjhWXA

Helicoils were used sometimes as more available and cheap, but just bent wire. Best avoided. I think you are building this engine as stock or a bit modified and I'm sure the engine is strong enough for a good deal more output as Porsche designed it. You can always go the whole hog with suffle pins a...

Interesting Mike. My hot 3.2 in the race Lola-Porsche has (too big) 50mm PMO's on, made 298 bhp @6400 on the new engine rollers, We stopped there as the engine was new-born. It is a bit rough to cold start, hot start is really good, and the tick over is a bit uneven and one side (4,5,6) pops a few t...

Just my 2d worth: When I did my 2.4 T/S engine in '92, Bob Watson said leave the studs alone. Mag case '7R' . The studs etc were all stock and looked good, and I think that make the decision. If your studs look corroded and the head threads look damaged etc then i would be tempted to time sert if yo...

Just a thought...

Might be good to help you sell if you say if it is an early magnesium case box and has a mechanical speedo drive or is an aluminium case with electronic speedo drive cable.
Is it a 4 or 5 speed box?
A picture speaks a 1000 words!

Just trying to help.

Been a long time since we had a nice bike.
This one this morning was so very nice:

4500 rpm, lift the clutch as fast as possible and focus...

About 2.2 sec start?

Seems to have come round quickly?
They arrive faster the more years you have!
Hope all is great and your present is greater!

Graham.