DDK - Die Deutschen Klassiker

Hello, as anyone successful removed the pin that holds the lock cylinder in place? What is the best way of doing it?

None fitted on my engine originally. But thinking of fitting some. Anyone found a cheap supplier?

HI Carl the bolts above are for the 9 bolt/later engine, SC/3.2/964, I would not use the 9 bolt, bolts twice, as I have come across the heads falling off the bolts you have will go back, as long as the socket hole is good and not rounded off, DO NOT use locktight on the threads, just the correct to...

SeanP wrote:They are one use only unless they are ARP bolts which are cheaper!

Where can I purchase ARP bolts?

Hello I have taken my flywheel of my '70 914/6 engine. Am I right in thinking the bolts are stretch type and now need replacing?

Anyone got a discount code? Is their a discount for PCGB members?

Registration is straight forward. You don't need an MOT or insurance to register!

What a fantastic inspiring story! Would love to see your car in action.

My '70 2lt chain tensioners have different part numbers. One is 901.105.519.0R and the other is 901.105.519.00 On the 0R the piston/shaft was protruding 2mm less than the 00. I have now rebuilt both.(0R still protruding 2mm less) The internal components were identical. The only difference is the bod...

dirk07 wrote:5,5 inch KPZ 613

5/71 spare wheel pristine KPZ 613 3A with original Michelin 165HR15 XMAS
11/72 spare wheel KPZ 613 3C with original BF Goodrich space saver
11/78 spare wheel KPZ 613 3E with original BF Goodrich space saver

Can you message me price and a few pics please?

Lightweight_911 wrote:.

4 1/2 in ?
5 1/2 in ?
6 in ?

.

5 1/2 or 6 in

What you got??

I've check the alignment on the right hand side sprocket. 4 shims under it like when I removed it. All measures within spec. The left hand sprocket was removed before I acquired the engine. The shims were missing. It requires 6 shims to put it within spec. Does this sound correct? What is the maximu...

bjmullan wrote:I believe you have one two many black. You should have 3 black and one brown.

Two more blacks required for the chain boxes. My part numbers seem right. So just going to suck it and see.

Hello, I am replacing the chain guides on a '70 914/6 engine. The ones that came out are all black and appear to be the same size. Although one as lost its end. The new set have five black and one brown. Is the brown one an upgrade? The new ones only lock in on one hole the other hole is elongated. ...