DDK - Die Deutschen Klassiker

WICKES or B &Q rain water gutter sealant, its the same stuff that is used to seal in the windscreens, and its only about £3 a tube! It does not set, yet its totally waterproof, and you can underseal or waxoyl over the top, and clean off any excess on the top with white spirit before glueing in t...

Right I have tried these on a 65 , and also on a 1985 911 and can say they fit on both cars.

Length will need triming, but that is to be expected,

Good seal, another usefull part!

Many thanks

we have wide black rubber bands, which we have had made specially for this job

Depends on the roll cage, a photo would help. As the bulkhead moves forward by about 50mm on the later cars, then you should be ok. If your after a correct early cage, that fits on the rear seat pivot bolt, we make these as well, for cars with or without sunroof!

To fit the earlier wing, you will need to cut away the very front of the impact bumper mounting bracket. There are so many differences in the impact bumper car, under the skin, that you might as well convert the (rust free) short bonnet to a long one and leave the structural integrity of the car alo...

Well I've been busy preparing and researching early panels so when I have time, i will have all the right parts at my fingertips. I have now made patterns to remanufacture the correctly detailed sills for the 64 - 68 cars, and although these pictures show my version for the 69-84 cars, be rest assur...

I agree with all thats been said above, but just to add a couple of pictures of my own http://i255.photobucket.com/albums/hh159/hartwell5948/30may2011033-1.jpg http://i255.photobucket.com/albums/hh159/hartwell5948/30may2011037-1.jpg Having a very good Edwards 40" box and pan folder, enables me ...

http://img.photobucket.com/albums/v22/Alan.UK/S_works_paint3.jpg Adjustable spring plate bosses + 3mm length http://img.photobucket.com/albums/v22/Alan.UK/1970%20S%202/shellbalsted2.jpg original length ones Just come across this thread, It gives me some thoughts of how to tackle FGW10C Looks good, ...

edit

Will have a look to see if theone i have to hand in the workshop is spare, if it is, I'll let you know

You are correct, It plugs into the main loom at the base of the rh a post, from there it goes to the rh interior light, and then across the screen aperture to the lh light. If the wiring has not been messed with, it should be lurking somewhere in the light box pressings in the roof, otherwise you wi...

Hi anyone had rear seat belts fitted into an early 911 (pre-impact) looking for a place that dose it and ball mark re costs ?? kind regards 1965 -67 cars, no mounts in the rear 68 - 71 2 mountings for 3 point belts 72 on lap belt mounts only hope this helps I can post a picture of the top mounts, a...

Hi ed Best to break this down into sections Mechanical Engine and Gearbox including all engine and gearbox mounts. Body Grind out 912 engine mounts, and chassis rail corner fillets and weld in new 911 engine mounts. Cut holes in RH engine bay inner wing, to take oil tank, (unless you want a R replic...

edit

Have this number on an imp which the owner wishes to sell. Is it of interest to anyone?

PM me if interested